Motor Size: 18.2*18.2 MM (square)

Motor length: 25 MM (without output bearing)

Output Shaft Diameter: 2.0 MM

Output Shaft Length: 18.5 MM

Motor weight: 33 g

       The Rated Voltage of This Motor Is 13.5V, the Use Voltage Is 12V-18V, It Can Also Be Pressurised to 24V, but 24V Is Not Suitable for Long Time Use, the Current Is High and Relatively Easy to Heat up, It Is Estimated That the Motor's Varistor Limit Is the Reason.

Voltage: 12 V 

Current: 0.04 A (1.17 A at blocked speed)

Rotational speed: 7200 RPM

Voltage: 13.5 V (rated voltage)

Current: 0.04 A (1.2A blocked)

Rotational speed: 7900 RPM

Voltage: 15 V 

Current: 0.05 A (1.6 A blocked)

Speed: 9000 RPM

Voltage: 18 V 

Current: 0.07 A (1.86 A blocked)

Speed: 1100 RPM

Voltage: 24 V (not suitable for prolonged operation)

Current: 0.016 A (2.3 A blocked)

 

Rotational speed: 14500 RPM

 

     Brush DC Motors, the Higher the Working Voltage, the Higher the Power, the Higher the Speed, the Higher the Torque, but Also the Higher the Current, Relatively Easy to Heat up, Please Decide the Working Voltage According to Your Own Use Environment.

 

        The Motor Pins Are Sent, Not the Original, Its Original Pins Are Welded to the Circuit Board, Because the Pins Are Relatively Soft, the Assembly of the Time to Use Sharp Pliers to Hold in Order to Complete, but Also Recognize the Direction, Because the Base Inside the Card Position, Is a Little Bit of Difficulty, but Fear of Trouble Friends Do Not Worry, If Too Much Trouble, Simply Pull out the Base, with Diagonal Pliers Can Pull out the Base, You Can See the Positive and Negative Poles of the Motor Can Be Seen, the Same As the Ordinary Motor.