Parameters:
Model: General purpose H8/H9/H11
Voltage: DC9-30V
Power: initial 44W/PCS, stable 36W/PCS
Lumen: Initial 3950lm, stable 2900lm
Light source: 7035 (link write LED)
Color: 6500K white
Application: Applied to automotive led headlight bulb
Selling Point:
1. Easy installation; Non-polar, built-in decoding IC, to solve most decoding installation problems.
2. Good light type; Light distribution distance 1mm, no dark area, 6 chip LED, paving wider
3. Higher brightness, can write 5 times the brightness of the original car
4. Long service life, 50000hrs+; The heat dissipation of copper tube is increased, and the heat conduction efficiency is 30 times that of copper plate.
5. Anti-electromagnetic interference
Install Caution:
1. As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process.
2. Put the vehicle into park or make sure it is securely in gear.
3. Make sure to have the ignition turned off and the keys removed.
4. Be careful to avoid burns, especially when turning on or off the vehicles lighting.
5. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting.
6. Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems.
7. Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulb.
