LMMDB

Coilovers Lowering Kit For Audi A4 B6 B7 2.0 TFSI 1.8T quattro S4 RS4 Saloon

Images

Coilovers Lowering Kit For Audi A4 B6 B7 2.0 TFSI 1.8T quattro S4 RS4 Saloon Coilovers Lowering Kit For Audi A4 B6 B7 2.0 TFSI 1.8T quattro S4 RS4 Saloon Coilovers Lowering Kit For Audi A4 B6 B7 2.0 TFSI 1.8T quattro S4 RS4 Saloon Coilovers Lowering Kit For Audi A4 B6 B7 2.0 TFSI 1.8T quattro S4 RS4 Saloon Coilovers Lowering Kit For Audi A4 B6 B7 2.0 TFSI 1.8T quattro S4 RS4 Saloon Coilovers Lowering Kit For Audi A4 B6 B7 2.0 TFSI 1.8T quattro S4 RS4 Saloon



All modifications must be installed by licensed mechanics and in compliance with your local modification regulations

​​​​​​​

Note: Front OE top mounts need to be modified ( drill bigger hole for shaft)

 

Coilover Suspension Kit for Audi A4 B6 B7 8E All Models

 

Application:

 

For AUDI A4 Avant (8E5, B6) 3 /1.9 TDI /1.8 T /2.0 FSI 2000-2005

For AUDI A4 Convertible (8H7, B6, 8HE, B7) 2.7 TDI/3/1.8 T/2 (01/2002-12/2009)

For AUDI A4 (8E2, B6) (11/2000-12/2005) 1.8 T for quattro /3.0 for quattro

For AUDI A4 Avant (8ED, B7) 1.9 TDI/2 /1.6 /2.0 TFSI /1.8 T (11/2004-06/2008)

For AUDI A4 (8EC, B7)  (11/2004-06/2008) 2.0 TFSI for quattro/ 1.8 T for quattro

 

 

 


Specification:

 

Height adjustable: Yes, lowering 0-25mm depending on the vehicle models

Spring rate Front: 6.5 kg/mm (364 lbs/in)

Spring rate Rear: 10 kg/mm (560 lbs/in)

Spring length Front: 295mm

Spring length Rear: 208mm

Front spring inner diameter:70-71mm

Rear spring inner diameter:42-46mm

Spring Preload advised: 7-10 mm

Top mounts: Not include

Warranty: 2 years

 

 

 

 

Quantity :

 

2x front coil-overs
2x rear coil-overs
2x C spanners

 

 

 


Feature:

 

1.  0-25mm(depends on vehicle models) lower height adjustable
2. Dust boot, solid rubber bump stops
3. Weight Saving Aluminum Components And heavy duty Steel Lower Mount Brackets
4. Simple install,  Easy to adjust.
5. Use the vehicle's original upper mounts (not included in our product kit).

 

 

 

 


Notice:


1. All modifications must be installed by licensed mechanics and in compliance with your local modification regulations.
2. Please ensure all components are tightened with correct torque specifications (which can be found in the vehicle service manual)before and after installation. Any loose nuts, bolts, or locks will cause noise. Do check and tighten before serious problems happen.
3. Impact wrench is prohibited during the installation, it will loosen or damage the product.
4. Examine the clearance between tires and suspension. ( The minimum clearance should be 4mm, otherwise, you need to add wheel spacers. Caution: It is not sufficient with torsion beam trailing arm axles)
5. We suggest regular maintenance for the coil-over, spray with some WD40 every 3-4 months will keep it smooth and clean, which helps to extend the lifetime.



Other items you might also like

  • Timing Cam Belt Kit + Water Pump for Ford Focus Fiesta Fusion KP35669XS Timing Cam Belt Kit + Water Pump for Ford Focus Fiesta Fusion KP35669XS
  • Coilovers Suspension Kit For Mazda Mazda6 GG Saloon hatchback 1.8 3.0 Coilovers Suspension Kit For Mazda Mazda6 GG Saloon hatchback 1.8 3.0
  • All-Weather Boot Liner for VW T-ROC 2017-2023 TPE Trunk Bed Mat Waterproof All-Weather Boot Liner for VW T-ROC 2017-2023 TPE Trunk Bed Mat Waterproof
  • Drive Shaft Front Left N/S Nearside Passenger Side For Ford Kuga Drive Shaft Front Left N/S Nearside Passenger Side For Ford Kuga
  • Turbo Cartridge for Peugeot RCZ 407 508 Citroën C5 Break 2.0 HDi 140 150 165 KW Turbo Cartridge for Peugeot RCZ 407 508 Citroën C5 Break 2.0 HDi 140 150 165 KW
  • Rear Diffuser Lip Valance Bumper + Side Spats For BMW X5 F15 M Sport 15-18 Rear Diffuser Lip Valance Bumper + Side Spats For BMW X5 F15 M Sport 15-18
  • Lower Front Wishbones Suspension Control Arms For Nissan 350Z 2002-2009 Pair Lower Front Wishbones Suspension Control Arms For Nissan 350Z 2002-2009 Pair
  • Cast Iron Water Pump for Jinma YD385 Y385T Tractor Engine Y480G-D1022 Direct Fit Cast Iron Water Pump for Jinma YD385 Y385T Tractor Engine Y480G-D1022 Direct Fit
  • Front Bumper Lip Assembly for BMW X3 G01 X4 G02 M Sport 2017-2021 Black Front Bumper Lip Assembly for BMW X3 G01 X4 G02 M Sport 2017-2021 Black
  • Forged Connecting Rods ARP 2000 for Ford X-flow Lotus twin cam 1600 4.826 Forged Connecting Rods ARP 2000 for Ford X-flow Lotus twin cam 1600 4.826"
  • 2-Pin Black Metal Heater Valve for BMW Z3 318ti 1995-2002 64114383988 2-Pin Black Metal Heater Valve for BMW Z3 318ti 1995-2002 64114383988
  • Aluminum Coolant Radiator for Audi TT A3 VW Jetta GTI Eos 2.0L Turbo 2006-2016 Aluminum Coolant Radiator for Audi TT A3 VW Jetta GTI Eos 2.0L Turbo 2006-2016
    • Research Department of maXpeedingrods has been dedicated to the academic research of tuning car performance, and it has invested huge amount of manpower and material resources in continuously improving the car performance indexes. maXpeedingrods has modern laboratory, production factory, testing equipment and advanced techniques. It focuses on researching and developing various performance products, such as, high-performance racing car’s connecting rod, crankshaft, piston, suspension and air spring. Meanwhile, as Australian EMTRON’s general agency, maXpeedingrods has a longstanding commitment to the research of ECU, engine, gearbox and vehicle performance electronic calibration. maXpeedingrods has millions of audience and enjoys relatively high popularity in the global tuning car market. Its products cover 60% of the mainstream vehicle performance tuning categories. Currently, maXpeedingrods has cumulatively researched and developed over 4,000 high-performance car parts and obtained many technical patents. Lots of research results have been converted into volume production and delivered to global tuning car enthusiasts.

    Established in 2006, maXpeedingrods has been engaged in the research of over world racing products and culture. It has strong capability of independent research & development, industry-leading capacity of quality control and perfect logistics and after-sales service system.

    Racing Team

    maXpeedingrods always follow the development concept that “Success derives from devotion and happiness comes from sharing” to make contributes to domestic and overseas car tuning enthusiasts and the global racing culture by excellent products and service.

    Partnership

    MaXpeedingrods has a longstanding commitment to the research of ECU, engine, gearbox and vehicle performance electronic calibration. We established cooperations with EMtron, Motec, LINK, Cartek, HiM, etc.

    Warehouse

    MaXpeedingrods owns its warehouses and branch offices in Hongkong, United States, Australia, United Kingdom and Germany.

    Other items you might also like

  • Timing Cam Belt Kit + Water Pump for Ford Focus Fiesta Fusion KP35669XS Timing Cam Belt Kit + Water Pump for Ford Focus Fiesta Fusion KP35669XS
  • Coilovers Suspension Kit For Mazda Mazda6 GG Saloon hatchback 1.8 3.0 Coilovers Suspension Kit For Mazda Mazda6 GG Saloon hatchback 1.8 3.0
  • All-Weather Boot Liner for VW T-ROC 2017-2023 TPE Trunk Bed Mat Waterproof All-Weather Boot Liner for VW T-ROC 2017-2023 TPE Trunk Bed Mat Waterproof
  • Drive Shaft Front Left N/S Nearside Passenger Side For Ford Kuga Drive Shaft Front Left N/S Nearside Passenger Side For Ford Kuga
  • Turbo Cartridge for Peugeot RCZ 407 508 Citroën C5 Break 2.0 HDi 140 150 165 KW Turbo Cartridge for Peugeot RCZ 407 508 Citroën C5 Break 2.0 HDi 140 150 165 KW
  • Rear Diffuser Lip Valance Bumper + Side Spats For BMW X5 F15 M Sport 15-18 Rear Diffuser Lip Valance Bumper + Side Spats For BMW X5 F15 M Sport 15-18
  • Lower Front Wishbones Suspension Control Arms For Nissan 350Z 2002-2009 Pair Lower Front Wishbones Suspension Control Arms For Nissan 350Z 2002-2009 Pair
  • Cast Iron Water Pump for Jinma YD385 Y385T Tractor Engine Y480G-D1022 Direct Fit Cast Iron Water Pump for Jinma YD385 Y385T Tractor Engine Y480G-D1022 Direct Fit
  • Front Bumper Lip Assembly for BMW X3 G01 X4 G02 M Sport 2017-2021 Black Front Bumper Lip Assembly for BMW X3 G01 X4 G02 M Sport 2017-2021 Black
  • Forged Connecting Rods ARP 2000 for Ford X-flow Lotus twin cam 1600 4.826 Forged Connecting Rods ARP 2000 for Ford X-flow Lotus twin cam 1600 4.826"
  • 2-Pin Black Metal Heater Valve for BMW Z3 318ti 1995-2002 64114383988 2-Pin Black Metal Heater Valve for BMW Z3 318ti 1995-2002 64114383988
  • Aluminum Coolant Radiator for Audi TT A3 VW Jetta GTI Eos 2.0L Turbo 2006-2016 Aluminum Coolant Radiator for Audi TT A3 VW Jetta GTI Eos 2.0L Turbo 2006-2016

    • Coilovers Lowering Kit For Audi A4 B6 B7 2.0 TFSI 1.8T quattro S4 RS4 Saloon

      Images

      Coilovers Lowering Kit For Audi A4 B6 B7 2.0 TFSI 1.8T quattro S4 RS4 Saloon Coilovers Lowering Kit For Audi A4 B6 B7 2.0 TFSI 1.8T quattro S4 RS4 Saloon Coilovers Lowering Kit For Audi A4 B6 B7 2.0 TFSI 1.8T quattro S4 RS4 Saloon Coilovers Lowering Kit For Audi A4 B6 B7 2.0 TFSI 1.8T quattro S4 RS4 Saloon Coilovers Lowering Kit For Audi A4 B6 B7 2.0 TFSI 1.8T quattro S4 RS4 Saloon Coilovers Lowering Kit For Audi A4 B6 B7 2.0 TFSI 1.8T quattro S4 RS4 Saloon



      All modifications must be installed by licensed mechanics and in compliance with your local modification regulations

      ​​​​​​​

      Note: Front OE top mounts need to be modified ( drill bigger hole for shaft)

       

      Coilover Suspension Kit for Audi A4 B6 B7 8E All Models

       

      Application:

       

      For AUDI A4 Avant (8E5, B6) 3 /1.9 TDI /1.8 T /2.0 FSI 2000-2005

      For AUDI A4 Convertible (8H7, B6, 8HE, B7) 2.7 TDI/3/1.8 T/2 (01/2002-12/2009)

      For AUDI A4 (8E2, B6) (11/2000-12/2005) 1.8 T for quattro /3.0 for quattro

      For AUDI A4 Avant (8ED, B7) 1.9 TDI/2 /1.6 /2.0 TFSI /1.8 T (11/2004-06/2008)

      For AUDI A4 (8EC, B7)  (11/2004-06/2008) 2.0 TFSI for quattro/ 1.8 T for quattro

       

       

       


      Specification:

       

      Height adjustable: Yes, lowering 0-25mm depending on the vehicle models

      Spring rate Front: 6.5 kg/mm (364 lbs/in)

      Spring rate Rear: 10 kg/mm (560 lbs/in)

      Spring length Front: 295mm

      Spring length Rear: 208mm

      Front spring inner diameter:70-71mm

      Rear spring inner diameter:42-46mm

      Spring Preload advised: 7-10 mm

      Top mounts: Not include

      Warranty: 2 years

       

       

       

       

      Quantity :

       

      2x front coil-overs
      2x rear coil-overs
      2x C spanners

       

       

       


      Feature:

       

      1.  0-25mm(depends on vehicle models) lower height adjustable
      2. Dust boot, solid rubber bump stops
      3. Weight Saving Aluminum Components And heavy duty Steel Lower Mount Brackets
      4. Simple install,  Easy to adjust.
      5. Use the vehicle's original upper mounts (not included in our product kit).

       

       

       

       


      Notice:


      1. All modifications must be installed by licensed mechanics and in compliance with your local modification regulations.
      2. Please ensure all components are tightened with correct torque specifications (which can be found in the vehicle service manual)before and after installation. Any loose nuts, bolts, or locks will cause noise. Do check and tighten before serious problems happen.
      3. Impact wrench is prohibited during the installation, it will loosen or damage the product.
      4. Examine the clearance between tires and suspension. ( The minimum clearance should be 4mm, otherwise, you need to add wheel spacers. Caution: It is not sufficient with torsion beam trailing arm axles)
      5. We suggest regular maintenance for the coil-over, spray with some WD40 every 3-4 months will keep it smooth and clean, which helps to extend the lifetime.



      Other items you might also like

    • 01.Will this fit my car?

      We have used the eBay compatibility list as a guide for buyers to use, but the eBay data system is not accurate and incomplete sometimes. Please make sure you have read through the whole listing and paid attention to “note” and “notice”. If there is any uncertain, please use the eBay message to check with our sales first.

      02.What payment methods do you accept?

      We currently only accept payment via PayPal. You can also use PayPal as a guest and pay using a debit or credit card.

      03.When will my order be dispatched?

      We will arrange the shipment in 1-3 business day after the payment is cleared. The tracking number will be updated on eBay in 24 hours after the shipment. Please notice that there is no shipment during weekend and holidays.

      04.Can I pick it up at the warehouse?

      Sorry no. Pick up service is not available.

      05.Can I amend my order?

      Sorry no. Once the payment is cleared, we cannot amend any item(s), quantities, or add or remove items. We are also unable to change the delivery address. Therefore, please double check all the order information before making payment.

      06.What do I do if I have not received my order?

      Please simply contact us via eBay messages, and then, we will get back to you as soon as possible with the update. Usually, we will follow up every shipment till customers get their order.

      07.What do I do if my product is faulty?

      Please simply contact us via eBay messages, and then, we will get back to you as soon as possible. It will speed up the process if you could provide us some pictures or video to illustrate the issue details.