Specifications:
Plug Type: 9005 , 9006 (can be for High Beam or Low beam )
LED Quantity(each bulb): 4pcs* COB chips
Operating Voltage: DC 9-32V(fit 12V,24V vehicles)
Color Temperature: Pure White 6000K
IP67 rated water and dust seal,over 50000hrs lifetime
Beam Angle: 360 Degree, 4-Side COB LED
Material: Aviation 6063 aluminum profile
Operating Temperature: -40-80 degree Celsius
Usage: high beam + low beam headlight combo
Features:
Our Advantanges: 4 Sides; Super Bright ; Mini Size ; Easy Install; Nearly 1:1 to your original light
1.100% New and Never Used
2. Super bright COB chip(USA),360 degree clear beam no blind zone
3. IP Rate: IP67
4.Built-in Smart Efficient Cooling System Fast Heat Dissipation
5. Built-in constant current CPU,instant full brightness without start-up relay
6.High quality Aluminum heat dissipation ensures the secure temperature range
7.Low Power Consumption than Halogen bulb, Energy Saving
8.Low Voltage Protection, High Precision Constant Current driver Chip
9.Shakeproof and Long lasting up to 50,000 Hours.
10. Heat Dissipation Theory: Heat Pipe Technology + A380 Aluminum Heatsink
11. All-in-one heat conductionkeep the light bulb in appropriate working temperature
12. Easy installation
Package Content:
2x 9005 LED Light Bulbs
Plug Type: 9005 , 9006 (can be for High Beam or Low beam )
LED Quantity(each bulb): 4pcs* COB chips
Operating Voltage: DC 9-32V(fit 12V,24V vehicles)
Color Temperature: Pure White 6000K
IP67 rated water and dust seal,over 50000hrs lifetime
Beam Angle: 360 Degree, 4-Side COB LED
Material: Aviation 6063 aluminum profile
Operating Temperature: -40-80 degree Celsius
Usage: high beam + low beam headlight combo
Features:
Our Advantanges: 4 Sides; Super Bright ; Mini Size ; Easy Install; Nearly 1:1 to your original light
1.100% New and Never Used
2. Super bright COB chip(USA),360 degree clear beam no blind zone
3. IP Rate: IP67
4.Built-in Smart Efficient Cooling System Fast Heat Dissipation
5. Built-in constant current CPU,instant full brightness without start-up relay
6.High quality Aluminum heat dissipation ensures the secure temperature range
7.Low Power Consumption than Halogen bulb, Energy Saving
8.Low Voltage Protection, High Precision Constant Current driver Chip
9.Shakeproof and Long lasting up to 50,000 Hours.
10. Heat Dissipation Theory: Heat Pipe Technology + A380 Aluminum Heatsink
11. All-in-one heat conductionkeep the light bulb in appropriate working temperature
12. Easy installation
Package Content:
2x 9005 LED Light Bulbs
2x 9006 LED Light Bulbs
1 Pair T10(As a Gift)
The box is sent randomly
Automotive LED headlight advantages:
LED lights than traditional halogen energy, more power.
Xenon lamp brightness and proximity , but the LED lights light up without delay, to enhance road safety. Instant start no strong currents impact , effectively protecting the car comes with a battery , improving battery life of more than 30%.
Fast cooling , the appearance of the most advanced design , thermal structure ingenious and reasonable.Less warranty, power driver with wide voltage constant current mode , the car can respond to a variety of voltage instability , the effective protection of normal use Led efficient and simple structure . Fewer Components damaged, repair the probability is very low , compared with HID ballast repair lower than 8% .
Heating temperature is low , protect the car . Xenon working temperature up to 800 ° -1000 ° , the main reason for the car ignition .
LED car headlights simple structure, fewer parts than xenon lamps, significantly lower than the xenon lamp failure rates !
Automotive LED headlamps color temperature balancing. The Xenon bulbs in the same color to clear , about 6000K.
Install Caution
1. As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process.
2. Put the vehicle into park or make sure it is securely in gear.
3. Be sure to turn off the ignition and remove the key.
4. Be careful to avoid burns, especially when turning on or off the vehicles lighting.
5. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting.
6. Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems.
7. Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulbs
The box is sent randomly
Automotive LED headlight advantages:
LED lights than traditional halogen energy, more power.
Xenon lamp brightness and proximity , but the LED lights light up without delay, to enhance road safety. Instant start no strong currents impact , effectively protecting the car comes with a battery , improving battery life of more than 30%.
Fast cooling , the appearance of the most advanced design , thermal structure ingenious and reasonable.Less warranty, power driver with wide voltage constant current mode , the car can respond to a variety of voltage instability , the effective protection of normal use Led efficient and simple structure . Fewer Components damaged, repair the probability is very low , compared with HID ballast repair lower than 8% .
Heating temperature is low , protect the car . Xenon working temperature up to 800 ° -1000 ° , the main reason for the car ignition .
LED car headlights simple structure, fewer parts than xenon lamps, significantly lower than the xenon lamp failure rates !
Automotive LED headlamps color temperature balancing. The Xenon bulbs in the same color to clear , about 6000K.
Install Caution
1. As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process.
2. Put the vehicle into park or make sure it is securely in gear.
3. Be sure to turn off the ignition and remove the key.
4. Be careful to avoid burns, especially when turning on or off the vehicles lighting.
5. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting.
6. Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems.
7. Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulbs
On Nov 4, 2022 at 07:21:49 PDT, seller added the following information: