Universal Cloning Electric Gate Garage Door Remote Control Key Fob 433mhz Cloner
4-Channel RF Wireless Remote Control Duplicator for Cars, Garage Doors, Gate Doors, Alarm Systems etc.
This is a fixed frequency remote cloner (433mhz) for copying 99.99% common fixed and learning code remote controls.
Clone up to 4 remote signals from 4 different remotes!
Specifications
Operating frequency: 433MHz
Remote control range: Up to 100 meter
Battery: 12V/27A (including)
With this replacement remote key, you can clone all 433MHz
Duplicate Your Existing Remote Controllers so you always have a backup:
1. Vehicle central locking systems
2. Garage doors
3. Electronic gates
4. Electrical appliances/Home automation i.e. lights
5. Car sunroofs
6. Car/Motorbike alarms
Mainly Used
Remote control electric retractable door
lift,
remote control barrier,
remote control shutter door,
Garage Door,
sliding door,
Remote control LED lights,
remote control fireworks igniter,
remote control bus door,
burglar alarm,
electric door alarm,
MP3 motorcycle anti-theft alarm, etc.
Remote control electric retractable door
lift,
remote control barrier,
remote control shutter door,
Garage Door,
sliding door,
Remote control LED lights,
remote control fireworks igniter,
remote control bus door,
burglar alarm,
electric door alarm,
MP3 motorcycle anti-theft alarm, etc.
Package Listing
1pc x Remote Control Key Fob
Note:
THIS ITEM IS NOT SUITABLE FOR CLONING ROLLING CODE REMOTES
With this replacement remote key you can clone all 433MHz fixed code key fobs based on supported IC
Supported IC CODE: Duplicable chips 2260 (all manufacturers), 2262 (all manufacturers), PT2264 (all manufacturers), 5326 (all manufacturers), 527 (all manufacturers), 1527 (all manufacturers), 2240 (all manufacturers)
HT6026, HT6012, HT6014 , HT600, HT680, HT6010, HT6207, HT640,
HT6P12E, HT6P20D,
12L-4SC, PT2292, 12L4SC, SC5262, PLC168, NF9420116, UM3750AM, SMC918, SMC908, 1416, 5211,
HCS101, HCS200, HCS201, HCS300, HCS301 (partial code)
If IC chips cannot match, it will not be copied, please verify the chip model before you buy.
We strongly suggest you check the IC CODE of your original remote key.
The replacement remote key may not work properly if you copy the code from an unsupported IC
Open the back shell of your original remote, to see the IC board
This copy of the remote control cannot copy a computer code and rolling code, the device can only copy fixed code or learn codes
Please replace the battery when the remote control distance is insufficient.
How To Program （So Easy）：
1. Press the two top button A&B until the LED flashes - this takes around 3 seconds.
2. Place the cloner remote and the original remote close together back to back or side by side or end to end so that they are touching.
3. Simultaneously press a button on your original remote and one of the buttons on the clone remote and hold until the LED on the clone remote flashes steadily. (The LED will first flash 3 times quick, then stops for a second, then flashes steadily for successful cloning).
4. Programming is now successful! If you want to program more buttons simply repeat steps 2-3-4. It's that easy! To reset the remote simply start again with step 1
5. If you still feel hard to program, please youtube some videos on how to pair. Thanks.
Code clearing method:
Press and hold the unlock and lock buttons at the same time (some shells have up and down buttons), the LED indicator flashes three times,
Release any of the pressed buttons, the other is not released,
Click the released button three times, the LED indicator will enter a fast flashing state, and all the data in the memory will be cleared.
After clearing the data on the remote control, no matter which button is pressed, the LED indicator will not light up.
Press and hold the unlock and lock buttons at the same time (some shells have up and down buttons), the LED indicator flashes three times,
Release any of the pressed buttons, the other is not released,
Click the released button three times, the LED indicator will enter a fast flashing state, and all the data in the memory will be cleared.
After clearing the data on the remote control, no matter which button is pressed, the LED indicator will not light up.
