Universal 30PCS Black Oil Filter Cup Extensive Set Wrench Tool Removal Socket AU
Universal 30PCS Black Oil Filter Cup Extensive Set Wrench Tool Set Removal Socket
 
 

Motivation for Clean Oil

Control of solid contamination in diesel and gasoline crankcase oils has a well-documented effect on engine reliability. Besides wear and reliability, particle

contamination can impact fuel economy, lubricant life and environmental issues.

Increased service life and reduction in maintenance cost is commonly reported by drivers who follow good filtration practices.

Oil Filter Selection Matters

While the benefits of clean oil are significant, low-quality filters are frequently specified for automobile engines.

Consider this, according to a study by one engine builder, particles smaller than 10 microns generated about 3.6 times more wear (rods, rings and main

bearings) than particles greater than 20 microns. Typical automotive oil filters remove particles 40 microns and larger.

Influence of Oil Filtration on Engine Wear

AC Delco Division of General Motors tested diesel engines and found an eight-fold improvement in wear rates and engine life with lower lube oil contaminant

levels.

In a related study on both diesel and automotive engines, General Motors reported that “compared to a 40-micron filter, engine wear was reduced by 50

percent with 30-micron filtration. Likewise, wear was reduced by 70 percent with 15-micron filtration”. Read that again. That's a lot of motivation for clean oil!

 
  • Extensive Set Designed for a Wide Range of Vehicles
  • Cap Type Filter Wrenches
  • Durable 7 and 16 Gauge Steel Construction
  • Withstands up to 115Nm (85lb.Ft) Of Torque
  • Strong Grip to Minimise Crushed Filters
  • Adjustable Oil Filter Wrench Included
  • Adaptor Allows Use with 3/8" or 1/2"Sq Drive Wrenches
  • Carry-Case for Travel and Storage

  • Product dimension (LxWxH): 53cm x 36cm x 10cm (approx)
  • Flute sizes (Flutes/Steps)
  • 65mm 14/1                  65-67mm 14/2
  • 66mm 6/1                    68mm 14/1
  • 73mm 14/1                  74mm 15/1
  • 74-76mm 15/2             75-77mm 15/2
  • 76mm 8/1                    76mm 12/1
  • 76mm 14/1                  76mm 30/1
  • 78mm 15/1                  80mm 15/1
  • 80-82mm 15/2             86mm 16/1
  • 86mm 18/1                  90mm 15/1
  • 92mm 10/1                  93mm 15/1
  • 93mm 36/1                  93mm 45/1
  • 95mm 15/1                  96mm 18/1
  • 100mm 15/1                106mm 15/1
  • 108mm 15/1                108mm 18/1
  • Filter claw wrench: Ø65-120mm
  • Adaptor: 3/8"Sq Drive(M) x 1/2"Sq Drive(F)
  • Package weight: approx 6.1kg
 
Brandspeedracing
Manufacturer Part Numbersr122272
Modification DescriptionMay be required
SizeDifference
TypeCombination Wrench, Fuel Filter Wrench, Oil Filter Wrench, Set, Socket Wrench, Torque Wrench, Wrench Set
Set or Single ItemSet
System of MeasurementSpecialty
Drive TypeSpecialty
Features-1Durable 7 and 16 Gauge Steel Construction
Features-2Withstands up to 115Nm (85lb.Ft) Of Torque
Features-3Adjustable oil filter wrench Ø65-120mm
Features-4Carry-Case for Travel and Storage
Features-5Cap Type Filter Wrenches
Features-6Adaptor Allows Use with 3/8" or 1/2"Sq Drive Wrenc
Features-7Extensive Set Designed for a Wide Range of Vehicle
Features-8Strong Grip to Minimise Crushed Filters
WarrantyLifetime
PushAuction