Upstream Lambda O2 Oxygen Sensor For BMW X1 X2 218i 2017-2020 220i 11788659884

Product Description

Note:This is a NEW OEM Part , May be a little dusty from storage use and have few minor scratches. Please review all pictures carefully and read description before buying. The compatibility we provide is accurate although may not guarantee 100%. We strongly recommend to match parts with yours, or contact your local dealer.
 
SPECIFICATION :
Condition:    New 
 
Manufacturer Part Number:
11788659884 
 
 
PACKAGE CONTENT :
1PCS 
 
 
COMPREHENSIVE VEHICLE COVERAGE

Make and Series

Model

Capacity

Year

Power Kw/HP

BMW 2 Active Tourer (F45)

216 i

1.5 L / 1499 cc

2018.03 -

80 Kw / 109 HP

BMW 2 Active Tourer (F45)

218 i

1.5 L / 1499 cc

2018.03 -

103 Kw / 140 HP

BMW 2 Active Tourer (F45)

220i

2.0 L / 1998 cc

2014.03 -

141 Kw / 192 HP

BMW 2 Gran Tourer (F46)

216 i

1.5 L / 1499 cc

2018.03 -

80 Kw / 109 HP

BMW 2 Gran Tourer (F46)

218i

1.5 L / 1499 cc

2017.04 -

103 Kw / 140 HP

BMW X1 (F48)

sDrive 18i

1.5 L / 1499 cc

2017.06 -

103 Kw / 140 HP

BMW X2 (F39)

M35 i

2.0 L / 1998 cc

2018.11 -

225 Kw / 306 HP

BMW X2 (F39)

sDrive 18 i

1.5 L / 1499 cc

2018.03 -

103 Kw / 140 HP

BMW X2 (F39)

sDrive 18 i

1.5 L / 1499 cc

2018.03 -

100 Kw / 136 HP

BMW X2 (F39)

sDrive 20 i

2.0 L / 1998 cc

2017.11 -

141 Kw / 192 HP

BMW X2 (F39)

xDrive 20 i

2.0 L / 1998 cc

2018.03 -

141 Kw / 192 HP

NOTE:Please check the picture and the part number carefully to make sure that you bought the right part for your car.The only way to be 100% sure that the part will fit your vehicle is to check your original part,You can also email us before purchasing, we will check for you and reply soon within 24 hours.

Q&A

Q:Why does the oxygen sensor have false alarm, after installation ?

A: The clearing of the errors can be obtained on most systems when the vehicle battery is disconnected for at least 60 seconds. The assignment of the new sensor parameters is done automatically when the errors are cleared, but in some systems a short adapting tour is required. In this case the vehicle has to be driven on the road for some 10-15 minutes, in order to have the ECU adapt itself to the new sensor.

Q: How do I know the O2 sensor is good or not ?

A: The only way to know if the O2 sensor is functioning normally is to check its responsiveness to changes in the air/fuel mixture, by Voltage Measurement or Waveform Simulation.

Q：How should I install oxygen sensor ?

A: The following is the installation instructions: Use the correct part number as listed in the application catalogue ,Do not use sensor if i has been dropped ,Remove protection cap just prior to installation;

Firstly install sensor body ensuring lead wire is not twisted or bent , Do not use impact wrench or socket type wrench to install sensor ,M18 sensors - install finger tight then 1/2-3/4 turn with a wrench (35-45Nm) ;

Then connect and route lead wire as originally installed , Do not allow lead wire to touch exhaust manifold or any other hot component ,Do not apply any substances (especially oil or grease) to connector sensor ,Do not use leaded fuels,silicone or metal based additives.

Q:When should replace the oxygen sensor?

A:Oxygen Sensor Failure Symptoms:

Reduced fuel mileage
Failed emissions testing
A check engine light
Poor drive-ability

It normally takes :

7-10 business days for US

5 -10 business days for UK, Cana da,  Germ an, Austral ia, Spain,Poland, France.,Asian countries .

14 -21 busi ness da ys for  Middle East countries.

18-25 business days for Rus sia, Brazil, European countries.

24-32 business days for South American countries.

Your tracking number, which will show up in your message as package sent, should keep you reassuring while you play with it. If any suspicious information is spotted, please break in and let us know! We are eager to help, otherwise it gives us an illusion of nothing going wrong.

Please contact us firstly when you need warranty service.
In case an item arrives faulty, please contact us in 30 days and keep it unused.
We will instruct you on how to return and get refund or replacement.
If after 30 days, or the item has been used, we have the right to decline your claim.
Items should be returned on buyers' cost for repair or replacement.
Customer Service got fired if they don't work things out with you, so knock their door at will. If any question came in mind, please felt free to contact us through Messages. We will respond in 1 Business day. There shall be nothing to worry about as we have confidence to solve your issue.
For a presumably defective product received, this one would be a bit tricky. Please tell us where the problem occurs, and our Customer Service and Technical Department will work it through with you. Pictures and videos can come in handy here.

 For any confusing or false description in the listing that causes a mis-purchase, please kindly remind us so we can improve our listings and continuously offer a better purchasing experience to you and to all our customers as well. Did it occur to be our mistake for the faulty transaction, we would be responsible for the return cost.
We wish you understand the pressures here, and our effort will always come to your aid.
We maintain high standards of excellence and strive for 100% customer satisfaction! 

We greatly appreciate your POSITIVE feedback. Please do NOT leave negative or neutral feedback without any contact. If you haven’t received item in 30 days, please contact us and we will arrange refund. 

Positive Feedback is very important to us. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns. 
Copyright © 2021 Dianxiaomi