Features:
Noiseless: This is Newest socket H7 Headlight without fans at the bottom of led bulbs, which provides you a quiet driving environment and does not affecting the heat dissipation of the lights.

Super Bright: 20W, 12000LM, 6500K per pair, Auxito customized LED chips, 200% brighter as original halogen bulbs. 

Plug and Play, 5 minutes installation, Polarity : Same design as halogen, wireless, easy to install without any modification.if the bulb does not light up when you installed, pls inverted the plug 180 degrees .

Efficient Cooling System: Whole aviation aluminum body, unique hollow-carved heat sink design with Intelligent IC make sure the LED conversion kits last longer.

Optimized Beam Pattern: This Auxito H7 LED fog light DRL bulb has 1:1 halogen filament design, apply the same length and position as the halogen bulb. It focuses light to match the standard beam pattern and does not blind oncoming traffic, no dark spots or foggy light.

Waterproof: IP65 water resistant and designed for use in heavy rains, rainproof housing, can work even in extreme situations.

 

Specifications:

• Bulb Size: H7 
• Voltage:  DC12-18V
• Power: 20W/per pair
• Lumen:  12000LM/per pair,no blind zone
• Color Temperature: 6500K
• LED Chips:LED chips
• Material: 6063 Heatsink aluminum shell
• Fanless: yes, no noise
• Lifespan: 50,000 hours
• Waterproof Rate: IP65
• Operating Temperature: -40℃~+90℃
• Application: Headlight High Beam / Low Beam / Fog Light / Driving Light / Daytime Running Light

 

Package Included: 
2x H7  LED Light Bulbs Clear White

 

 

Install Caution
1. As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process.
2. Put the vehicle into park or make sure it is securely in gear.
3. Make sure to have the ignition turned off and the keys removed.
4. Be careful to avoid burns, especially when turning on or off the vehicles lighting.
5. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting.
6. Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems.
7. Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulb.

 

CANBUS ERROR FREE: No. For most vehicles, just directly plug and play. Yet for some vehicles with CAN-BUS system, it may require install decoder or load resistor to avoid hyper flash or fast blinking.

 

Please Note:
Please check your car manual or original bulb to confirm the bulb size, length is correct or not before purchasing to save your time.If you are unsure please contact us.Thank you!

---

On 01/09/2025 at 20:44:10 AEST, seller added the following information: