Apply compatible resin, adhesive and cartridge-based products with greater control using the Timco Heavy Duty Resin Gun. Designed for demanding construction and repair applications, this 64mm co-axial applicator combines a high 25:1 thrust ratio with a robust trigger and plunger system to provide smooth, controlled dispensing of high-viscosity materials.
The applicator uses twin 5mm gripper plates, creating four-point contact with the plunger rod for secure engagement and consistent force transfer. This helps provide controlled extrusion when working with demanding resin and adhesive cartridges.
A non-drip mechanism helps reduce unwanted material discharge after the trigger is released, making application cleaner and helping minimise material waste. The gun accommodates compatible cartridges up to 410ml and weighs approximately 984g, providing a balance of strength and manageable handling.
Ideal for professional contractors, installers, builders, maintenance teams and DIY users, this resin gun is suitable for compatible resin, adhesive and chemical anchoring cartridge applications.
The 25:1 trigger ratio provides increased mechanical advantage for controlled dispensing of higher-viscosity resin and adhesive materials, reducing the effort required at the trigger.
The co-axial cartridge holder is designed for compatible resin cartridges up to 410ml, providing secure cartridge positioning during application.
Twin 5mm gripper plates provide four contact points around the plunger rod, helping maintain stable engagement and consistent pressure as the material is dispensed.
The non-drip system helps reduce unwanted material flow once pressure is released, helping keep the work area cleaner and reduce unnecessary material waste.
Manufactured for regular trade and construction use, the robust design is suitable for demanding application environments while remaining practical to carry and handle.
Suitable for compatible:
| Specification | Details |
|---|---|
| Brand | Timco |
| Product Type | Resin / Cartridge Applicator Gun |
| Design | Co-Axial |
| Barrel Size | 64mm |
| Maximum Cartridge Capacity | Up to 410ml* |
| Thrust Ratio | 25:1 |
| Gripper Plates | Twin 5mm |
| Plunger Contact | Four-point |
| Mechanism | Non-drip |
| Weight | Approx. 984g |
| Application | Resin, Adhesive & Compatible Cartridge Products |
*Cartridge compatibility depends on the exact cartridge dimensions and configuration. Check the manufacturer's compatibility requirements before use.
The combination of a 25:1 thrust ratio, co-axial cartridge design, four-point plunger engagement and non-drip mechanism makes this applicator particularly suitable for demanding resin and adhesive applications where controlled dispensing and reduced operator effort are important.