Fiber UV / LED base with nylon fibers

Reinforcing basecoat with unique properties.

Camouflage shade.

Contains visible nylon fibers that create a powerful protective frame on the surface of the nail, at the same time very hard and flexible.

When applying Fiber Base PNB fiber base serve as a reinforcing element. Protect the nail plate from breakage and delamination.

Vitamin E and calcium (Ca), which are part of Fiber Base PNB, have a firming effect, and the natural growth of healthy nails is resumed.

Fiber Base PNB thick, medium viscosity.

Self-leveling on the surface of the nail, filling irregularities.

Perfect for strengthening, repair, reconstruction of nails, modeling the form and building a small free edge.

Ideal base coat for weak, brittle and thin nails.

The optimal choice for a manicure jacket without additional color coverage.

Wearability coverage for at least 21 days.

It has a dispersion (sticky) layer, excellent adhesive properties.

Cures in a UV / LED lamp 48 watts - 60 sec.

It is used as an independent gel-lacquer coating and as a basis for colored gel-varnish.

Recommendations for application:

We perform standard mechanical preparation of the nail plate.

We treat nails with a Nail Dehydrator degreaser.

Apply acid-free primer Bond Control, dried in air for 30 seconds.

The first layer of the base is applied with a thin layer, rubbing movements. We dry.

After applying another 1 thin layer of the base, not reaching the cuticle of 0.5 mm. We type a small drop of Fiber Base PNB onto the brush and distribute it evenly over the non-dried layer, simulating the shape of the nail. We cure 60 seconds in the UV / LED lamp.

Apply color gel polish in 1 - 2 layers, drying each. Top cover top.

Tips:

After applying the base layer, you must wait a few seconds while the Fiber Base fibers “sink”. After that, dry in the lamp.

When applying the second base modeling layer, we recommend using a thin brush 10 D PNB.

In case of discomfort during base polymerization on a very thin, sensitive nail plate, turn on a less intensive polymerization mode in the lamp.