|

Timing Chain Kit For 09-10 Ford F-150 06-10 Explorer 05-10 Mustang 4.6L V8 SOHC What is a timing chain? A timing chain is responsible for controlling your pistons and valves, making sure they operate precisely when they need to inside your engine cylinders. Four-stroke engines operate on a cycle with, yes, you guessed it, four strokes within each one. - Intake stroke
- Compression stroke
- Power stroke
- Exhaust stroke
Timing chain advantages and disadvantages Advantages: - A chain offers superior strength, giving it a far longer lifespan. Hopefully, with proper care and maintenance, a timing chain should last the lifetime of your vehicle.
- Maintenance is simple—keep up with your oil changes and consider a one-off check at the 125k-mile mark.
- A metal chain is heat resistant, so isn’t vulnerable to changing conditions in the weather. A rubber belt can freeze in low temperatures, affecting performance.
Disadvantages: - A timing chain is much heavier than a rubber timing belt. This increases fuel consumption, and in turn, affects your fuel economy, adding to pollution, and impacts engine power.
- A timing chain is far noisier than a timing belt.
- Due to the extra weight, a timing chain is often only available for use on larger engine cylinders.
- They're considerably more expensive to replace and to work on.
- A timing chain requires constant lubrication.
Application For For 07-10 Ford Explorer Sport Trac 4.6L 281CID V8 SOHC Spec Note:(24 Valve) VIN Code "8"-TRITON Engine For 06-10 Ford Explorer 4.6L 281CID V8 SOHC Spec Note:(24 Valve) VIN Code "8"-TRITON Engine For 09-10 Ford F-150 4.6L 281CID V8 SOHC Spec Note:(24 Valve) VIN Code "8"-TRITON Engine For 05-10 Ford Mustang 4.6L 281CID V8 SOHC Spec Note:(24 Valve) VIN Code "H"-TRITON Engine For 06-10 Mercury Mountaineer 4.6L 281CID V8 SOHC Spec Note:(24 Valve) VIN Code "8"-TRITON Engine Gears and Sprockets are NOT included in this kit Package Included 2 Timing Chain (116 links) 2 Tensioners (left and right) 2 Tensioner Arms (left and right) 2 Guide Rails (left and right) Is the timing chain immune to mechanical failures? The simple answer is No, it is not. Timing chain problems are not uncommon, especially in high-mileage vehicles. Like any other moving mechanical component inside any engine, a timing chain is subject to wear. A timing chain is lubricated by the engine oil. Lack of oil changes, low oil level or poor oil quality can cause the timing chain to wear faster. When does a timing chain need to be replaced? The timing chain normally needs to be replaced between 80,000 and 120,000 miles unless there is a specific problem. Issues with the chain are common in higher mileage vehicles. If driving an older vehicle, or one with close to 100,000 miles, it is recommended to look for symptoms of the timing chain going bad or failing. Signs a timing chain needs to be replaced include - Later model VVT applications will generate engine codes and check engine lights prior to engine rattle
- Older, pre-VVT applications will generate engine rattle.
Should you also replace the sprockets? Yes, Cloyes recommends that all components of the timing system be replaced at the same time. Using a worn sprocket may result in the chain not meshing with the worn sprocket, which could result in poor engine performance. Cloyes offers a wide range of complete timing chain kits for majority of vehicles on the road today. Installion
- The engine accessories are removed, the engine oil is drained, and the front engine cover is removed.
- The tension on the timing chain tensioner is released.
- The camshaft and crankshaft gears are removed along with the timing chain, and the technician makes special note of the position they were in.
- The new timing chain is installed on the gears, then the gears and chain are re-installed in the same position.
- The front cover is re-installed, the accessories mounted, and engine oil topped up.
- The technician runs the engine and road tests to confirm the repair is successful.
Why choose us? - 1 Year warranty
- High Quality Product
- Built to strict quality control standards
- Direct replacement
? Note - Please check complete Year, Make, Model, Trim, and Engine Size of your vehicle in the Compatibility Chart before Purchase.
- If you have any question,please contact us.
|
About us:
Our store, USdealsparts, located in Ontario, California, United States, are committed to provide most of the Auto Parts & Accessories, and car tools, with high quality product.
All the package will be handled within 48 hours, over 90% of the pacakge will be pacakged within 24 hours.
And it takes about 2-7 days in transit.
If you have any quesiton or problem, contact us vis ebay message.
|
|
Compatibility should be checked and confirmed before placing order!
Steps of confirming the compatibilities:
- Manage "My Garage", and chose the right one when placing order;
- Or chose the "Year/Make/Model/Trim/Engine" of your vehicle on the compatible chart;
- Or Contact us if you have any question in confirming the compatibility, to make sure you will get the right and compatible item.
You will get what you see in the picture showed.
Payment:

- All these methods which are acceptalbe by eBay.
Shipping:
- All item will be packed with well condition in box or envelope, we make sure the item is in good protection, also please check all the item when you get the package.
- Product will be shipped within 2 business days after full payment is received and verified.
- All domestic orders will be shipped via USPS, UPS or FedEx from our US warehouse (CA Or GA) and usually arrives to your door in about 2-7 business days.
Returns:
- 30-day free return will be provided.
- Please note that the situations below will not be incounted:
- Ordered by mistake.
- Don't like it.
- Duplicated orders.
- Damaged product during installation.
Contact Us:
Any quesiton or problem, do contact us please.
We are always online to answer.
Want a sale? CLICK here 

|