PULS CD5.241-S1 / CD5241S1 DC/DC CONVERTER, 120W, 18-32VDC IN, 23-2 8VDC OUT, 5-4.3A WITH SIGNAL CONTACTS

• Overview

Puls

DC DC Converters, DIMENSION Series

Item# CD5.241-S1 - DC/DC CONVERTER, 120W, 18-32VDC 23-28VDC OUT, 5-4.3A W/SIGNAL

DIMENSION Series Information

DC/DC Converter, Isolated Output

24V Input, 12V Output

Efficiency Up To 90.2%

Negligibly Low Input Inrush Current

Width Only 32mm

The Dimension CD‑Series offer DIN‑rail DC/DC converters in the 92‑120W output power range in a very compact housing. These DC/DC converters are allowed to run with a battery or similar sources or can also be used to refresh and stabilize the 24Vdc on the end of long cable runs. The basic units include all the essential basic functions while the ‑S1 version is equipped with quick‑connect spring clamp terminals, a DC‑OK‑contact which monitors the output and an input‑low‑relay‑contact. The ‑L1 version additionally fulfills the NEC Class 2 requirements. All devices except the CD5.241‑L1 have a PowerBoost of 20% incorporated. This extra power can even be used continuously up to +45°C.

Soft-Start Function Included

Full Power Between -25°C and +60°C

Specifications

Item Number: CD5.241-S1

Brand: Puls

Item Category:Power Supplies

Subcategory: DC/DC Converters

Series: DIMENSION

Power: 144 Watts

Nominal Input VDC: 24 Volts DC

Input VDC: 18 to 32.4 Volts DC

Nominal Output VDC: 24

Output VDC: 23~28

Output Current: 6

Number of Outputs: 1

I/O Isolation Voltage: 1000 VAC

Mounting: DIN Rail

Encapsulated: No

Efficiency %: 90.2 Percent

Output Voltage Adj.: Yes

Overvoltage Protection: Yes

Overload Protection: Yes

Short Circuit Protection: Yes

Power Factor Correction: No

Remote Sensing: Yes

Remote On/Off Control: No

Operating Temperature: -13 to 158 Degrees F

Standards/Compliances: EN61000-6-1,2,3,4;EN55011/EN55022 CLASS B

Approvals: ATEX,GL,cULus,cURus,CE

RoHS: Yes

H x W x D: 4.88 in x 1.26 in x 4.02 in

As pictured no box.