• Product Feature:
  •  
  • * Application: Works on All 2003-2010 6.0L and 6.4L Engines.
  •  * High Quality: Advanced blackening hard steel process, durability, ultra-precise design meets the requirement of high precision and hardness and a much longer service life.
  •  * Benefit: The separate tap could be replaced at any hardware store at minimal cost if it wears out or breaks. The shortness of the tool allows this to be done in the engine compartment very easily.

    • 6.0L/6.4L Powerstroke Fuel Injector Sleeve/Cup Remove & Install Kits for All Ford 6.0L & 6.4L Engines 2003-2010

    Product Feature:

     

    * Application: Works on All 2003-2010 6.0L and 6.4L Engines.


    * High Quality: Advanced blackening hard steel process, durability, ultra-precise design meets the requirement of high precision and hardness and a much longer service life.


    * Benefit: The separate tap could be replaced at any hardware store at minimal cost if it wears out or breaks. The shortness of the tool allows this to be done in the engine compartment very easily.


    * Easier Work: 1. Thread the Tap portion into the injector cup then crank the bolt down. 2. Put the removal into the injector cup and holds them onto the cup, then tighten the nut on the tool to pull the cup out. 3. Place the injector cup over the end of the installer then place it back into the injector hole and hammer it until you hit solid ground.


    Product Description:

     

    Color: Remove & Install Kit

     

    Feature:


    --Tool allows replacement of the injector sleeves / cups without removing the heads from the vehicle.

     

    --New design utilizes a separate tap: If the tap becomes damaged it can be replaced locally at low cost versus replacing the entire tool.

     

    --Installation tool utilizes an o-ring to retain the injector cup and keep it from dropping off during installation.

     

    How to use: 


    Use the Tap to make threads inside the injector cup.
    Pull out the injector cup through Puller.
    Install the new sleeve/cups with the help of Sleeve Installer.

     

    Note: 


    The tap is separate from the puller portion of the tool, you may purchase an inexpensive tap at the local hardware store. By installing this 6.0 Powerstroke injector cup tool, you'll also need an o-ring (provided by head repair kit ) to retain the injector sleeve to the installer.

     

    Package Details:

     

    1Pcs Electrical Connector Remover Tool
    1Pcs Sleeve Installer
    1Pcs Puller


    Item Specifics
    Brand Unbranded
    Manufacturer Part Number Does Not Apply
    Type Fuel Injector Sleeve/Cup Remove & Install Kits
    Fitment For Ford 6.0L / 6.4L Powerstroke Diesel Engine 2003-2010
    Material Steel
    Warranty 1 Year

    Payment

    We accept payment visa payonner, paypal, credit card, debit card and many other mothods.

    Shipping

    Orders will be ship out within 1-2 business days after payment has cleared. Orders from Saturdays, Sundays or holidays will process on next business day and will be ship within 24 hours. Please allow 10-30 days for international deliveries. Some shipments could take longer subject to your local customs authorities.

    Returns

    1. Return to us within 30 days from the delivery date for exchange or refund. Refund will be given as Money back or item exchange (buyer's choice).

    2. Return shipping fee is the responsibility of buyer unless the return is a result of our mistake. And all non seller mistake returns for refund are subject to 20% re-stocking fee.

    3. If you need return, please contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation.

    Contact Us

    If you have any question, please feel free to contact us 24 Hours a Day, 7 Days a Week, and we will reply you ASAP. If no response within 24 Hours, please check the spam of mail box or kindly re-send it to us.

    6.0L/6.4L Powerstroke Fuel Injector Sleeve/Cup Remove & Install Kits for All Ford 6.0L & 6.4L Engines 2003-2010

    Product Feature:

     

    * Application: Works on All 2003-2010 6.0L and 6.4L Engines.


    * High Quality: Advanced blackening hard steel process, durability, ultra-precise design meets the requirement of high precision and hardness and a much longer service life.


    * Benefit: The separate tap could be replaced at any hardware store at minimal cost if it wears out or breaks. The shortness of the tool allows this to be done in the engine compartment very easily.


    * Easier Work: 1. Thread the Tap portion into the injector cup then crank the bolt down. 2. Put the removal into the injector cup and holds them onto the cup, then tighten the nut on the tool to pull the cup out. 3. Place the injector cup over the end of the installer then place it back into the injector hole and hammer it until you hit solid ground.


    Product Description:

     

    Color: Remove & Install Kit

     

    Feature:


    --Tool allows replacement of the injector sleeves / cups without removing the heads from the vehicle.

     

    --New design utilizes a separate tap: If the tap becomes damaged it can be replaced locally at low cost versus replacing the entire tool.

     

    --Installation tool utilizes an o-ring to retain the injector cup and keep it from dropping off during installation.

     

    How to use: 


    Use the Tap to make threads inside the injector cup.
    Pull out the injector cup through Puller.
    Install the new sleeve/cups with the help of Sleeve Installer.

     

    Note: 


    The tap is separate from the puller portion of the tool, you may purchase an inexpensive tap at the local hardware store. By installing this 6.0 Powerstroke injector cup tool, you'll also need an o-ring (provided by head repair kit ) to retain the injector sleeve to the installer.

     

    Package Details:

     

    1Pcs Electrical Connector Remover Tool
    1Pcs Sleeve Installer
    1Pcs Puller



    We accept payment visa payonner, paypal, credit card, debit card and many other mothods.

    Orders will be ship out within 1-2 business days after payment has cleared. Orders from Saturdays, Sundays or holidays will process on next business day and will be ship within 24 hours. Please allow 10-30 days for international deliveries. Some shipments could take longer subject to your local customs authorities.

    1. Return to us within 30 days from the delivery date for exchange or refund. Refund will be given as Money back or item exchange (buyer's choice).

    2. Return shipping fee is the responsibility of buyer unless the return is a result of our mistake. And all non seller mistake returns for refund are subject to 20% re-stocking fee.

    3. If you need return, please contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation.

    If you have any question, please feel free to contact us 24 Hours a Day, 7 Days a Week, and we will reply you ASAP. If no response within 24 Hours, please check the spam of mail box or kindly re-send it to us.


    All rights reserved.