62mm Self-Adhesive Insulation Hangers / Stick Pins, supplied with washers for reliable retention. Designed for fixing insulation to suitable metal surfaces, these adhesive-backed pins provide a convenient alternative to drilling or using separate mechanical fixings. The 62mm metal pin penetrates the insulation material and provides a fixing point for the supplied retaining washer, helping hold the insulation securely against the substrate. They are particularly useful for HVAC ductwork, metal surfaces, camper van conversions, vehicle insulation, workshops and general insulation projects where a fast installation method is required. Suitable for a wide variety of pre-formed insulation products, including Rockwool, mineral wool, glass fibre, polystyrene, PU foam, PIR, phenolic foam and cork. The self-adhesive base allows quick positioning on clean, suitable surfaces before the insulation is installed. For best adhesion, the fixing surface should be clean, dry and free from grease, dust and contaminants. Using suitable panel wipes or surface preparation products can help achieve a stronger and more reliable bond. Not suitable for brittle insulation materials such as calcium silicate or foamed glass. Always ensure the substrate and insulation type are suitable before installation.

• QUICK SELF-ADHESIVE INSTALLATION: The adhesive-backed base allows the insulation hanger to be positioned directly onto a suitable clean metal surface without drilling, helping speed up installation and reduce preparation time.
• 62MM STICK PIN FOR INSULATION FIXING: The 62mm pin provides useful penetration through pre-formed insulation materials, helping secure insulation against the substrate when used with the supplied retaining washer.
• WASHER INCLUDED FOR SECURE RETENTION: Supplied washers help retain the insulation securely on the pin and distribute pressure around the fixing point for a more stable installation.
• SUITABLE FOR MULTIPLE INSULATION TYPES: Designed for use with suitable pre-formed insulation materials including Rockwool, mineral wool, glass fibre, polystyrene, PU foam, PIR, phenolic foam and cork.
• IDEAL FOR HVAC & VEHICLE INSULATION: A practical fixing solution for metal ducting, HVAC installations, camper van conversions, vehicle insulation, workshops and general insulation applications.

FEATURES

• 62mm self-adhesive insulation stick pins
• Adhesive-backed metal base
• Insulation hanger design
• Retaining washers included
• Box of 50 pins
• Quick and convenient installation
• Designed for suitable metal surfaces
• Suitable for Rockwool & mineral wool
• Suitable for glass fibre insulation
• Suitable for PIR & PU foam
• Suitable for polystyrene
• Suitable for phenolic foam
• Suitable for cork insulation
• Corrosion-resistant construction
• Ideal for HVAC ducting
• Suitable for camper van conversions
• Useful for vehicle insulation
• Suitable for professional & DIY applications

IDEAL APPLICATIONS

• HVAC insulation
• Ductwork insulation
• Metal ducting
• Rockwool fixing
• Mineral wool installation
• PIR insulation
• PU foam insulation
• Camper van conversions
• Vehicle insulation
• Workshop insulation
• General insulation projects
• DIY insulation work

IMPORTANT INSTALLATION INFORMATION

• Apply only to clean, dry and suitable surfaces.
• Remove dust, grease, oil and other contaminants before installation.
• Suitable surface preparation can help improve adhesive performance.
• Use the supplied washer to retain the insulation on the stick pin.
• Not suitable for brittle insulation such as calcium silicate or foamed glass.
• Always check compatibility between the fixing, substrate and insulation material before installation.