New AC Compressor For CO 4775C 55036561 For 94-05 Dodge Ram 2500 Ram 3500 5.9L
Specifications
Clocking: 11
Clutch Diameter (mm): 119
Discharge Port (mm): 16.5
Gauge Line (mm): 44.6
Grooves : 8
MOUNT TYPE: Tangent
Oil: PAG 100
Suction Port (mm): 16.5
Type: Piston
Voltage: 12
Package Content
1 x A/C Compressor
Fitment:
1994-2005 Dodge Ram 2500 5.9L)
1994-2005 Dodge Ram 3500 5.9L)
OEM and Competitor Interchange:
AC Delco: 1520930
AC Delco: 1521001
AC Delco: 1521895
Airpro: 207031
Airpro: 207040
Austin Baker: 10309430
Austin Baker: 10345730
Austin Baker: 10345731
Autocomp Technologies: 1016380
Autocomp Technologies: 1016411
Autocomp Technologies: 1016441
Autocomp Technologies: 1041216
Autocomp Technologies: 1041247
Autocomp Technologies: 1041277
Autocomp Technologies: 1050347
Autocomp Technologies: 1050378
Autocomp Technologies: 1050408
Autocomp Technologies: 1055461
Autocomp Technologies: 1055492
Autocomp Technologies: 1055522
Autocomp Technologies: 6511617
Autocomp Technologies: 887814
Autocomp Technologies: 887845
Autocomp Technologies: 887875
Autocomp Technologies: 900233
Autocomp Technologies: 900264
Autocomp Technologies: 900294
Chrysler: 55036561
Chrysler: 55055339AE
Chrysler: 55055339AI
Chrysler: RL055339AH
Compressor Works: 638589
Delphi Automotive Systems: CS20148
Denso Automotive Systems: 4717009
Four Seasons: 67589
Four Seasons: 68589
Frigette: 2041165
Global Parts Distributors: 5511617
Global Parts Distributors: 6511617
Global Parts Distributors: 7511617
Hodyon: 364682NA
MEI: SD4775
NAPA: 252130
NAPA: 272130
NAPA: TEM252130
NAPA: TEM272130
Omega: 2004606
Omega: 2004775
Omega: 2004775AM
Oreilly Auto Parts: 67589
Ranshu: 14SD4682
Ranshu: 14SD4682NEW
Ranshu: 14SD4682RC
Ready-Aire/Proliance: 2283
Ready-Aire/Proliance: 2283N
Sanden: 4330
Sanden: 4364
Sanden: 4606
Sanden: 4682
Sanden: 4721
Sanden: 4750
Sanden: 4775
Sanden: 4775AFT
Sanden: 4789
Sanden: 4829
Sanden: 4889
Sanden: 4899
Spectra Premium: 0668589
Trad Automotive: C104
Trad Automotive: C104R
Valeo: 10000547
Visteon: 000503
Visteon: 010468
UAC: CO 4775C
COMPRESSOR INSTALLATION INSTRUCTIONS
Please read these instructions prior to any repairs on your vehicle.
Follow all federal, state, and local regulations when repairing an automotive A/C system.
Take appropriate safety precautions –
1. Wear eye protection (safety glasses).
2. Do not smoke next to the vehicle when performing repairs.
3. Work in a well-ventilated area.
4. Wear skin protection (such as gloves and closed toe shoes).
5. Recover refrigerant before making repairs.
REMOVING THE OLD COMPRESSOR
1. Open the hood of the vehicle and locate the A/C Compressor.
2. Remove the A/C belt from the A/C Compressor pulley. This may involve loosening the belt tensioner (if it is equipped).
3. Evacuate the A/C system using a refrigerant recovery machine.
4. Disconnect the negative battery cable.
5. Remove the bolt that secures refrigerant lines to the A/C Compressor. Then, inspect the A/C lines for any contamination such as metal or excessive dirt inside them. If any contamination is found, the system will need to be cleaned.
6. Disconnect any electrical connectors from the A/C Compressor.
7. Remove the AC Connections. Remove the A/C Compressor mounting bolts.
8. Remove the A/C Compressor from the vehicle.
INSTALLING THE NEW or REMANUFACTURED A/C COMPRESSOR
1. Once the old compressor has been removed, begin by removing the receiver/drier or accumulator, and the expansion valve or orifice tube from the vehicle.
2. Next, flush the condenser and evaporator using a non-oil based A/C flush. The valve must be removed on expansion valve system before the evaporator can be flushed.
Flush evaporators from inlet to outlet.
Flush condensers from outlet to inlet.
NOTE: Condensers produced from 1990 – present are extremely difficult to clean. As a result, if the compressor had a major failure, it is recommended that the condenser be replaced.
3. This compressor comes pre-filled with the correct amount of oil. Thus, there is no need to add any additional oil to your system.
4. Install the new receiver drier or accumulator, and new expansion valve or orifice tube.
5. Next, install the new or remanufactured A/C Compressor.
6. Install and tighten the A/C Compressor mounting bolts.
7. Reconnect any electrical connectors to the A/C Compressor.
8. Re-install the refrigerant lines and A/C belt to the A/C Compressor.
9. Reconnect the negative battery cable.
10. Evacuate the A/C system with an A/C servicing machine for at least one hour.
11. Check the system for leaks.
12. If there are no leaks, install the refrigerant charge (Check the A/C system sticker under the hood of the vehicle for the proper amount and type of refrigerant for the system). Then, let the system set for 2 minutes. Doing so will allow the refrigerant to carry the oil and spread more evenly throughout the system.
13. Start the vehicle’s engine and turn on the A/C system.
Make sure the windows and doors of the vehicle are open.
Should you have any questions regarding the installation of your new or remanufactured compressor, please do not hesitate to contact us.
Frequently Asked Questions
Q. Does the compressor come with oil?
A. Yes! This compressor comes pre-filled with the correct amount of oil. Thus, there is no need to add any additional oil to your system.
Q. Does the compressor come with the clutch and pulley?
A. Yes, all of our compressors come complete with the clutch and pulley unless otherwise advertised.
Q. How long does shipping take?
A. Shipping usually takes anywhere from 1 to 5 business days. The amount of time it takes for the compressor to reach your destination depends on your location.
Q. Do you accept returns?
A. Yes, we accept returns within 14 days of purchase on all unused items. Any product you return must be in the same condition you received it and in the original packaging. A return authorization number (RMA #) is required from A/C Compressors prior to returning any merchandise. Your request to return these parts must be received by us within 14 days from the date of purchase. The purchaser is responsible for shipping charges to return all parts. Returned items that are found to have been installed, dirty, tampered with, locked up, or physically damaged will not be refundable.
Q. What is the return shipping address?
Online Seller RMA , 41 logistics Blvd, Suite A-2 #44364006 , Walton Kentucky 41094 US
NOTE: In order to determine if you are purchasing the correct part, please provide us with the year, make, model, and engine size of your vehicle. Failure to do so will result in the purchaser being responsible for any and all fees associated with returning the item for a refund. If the purchaser does not send us the year, make, model, and engine size and the purchaser receives a compressor which does not fit the purchaser's vehicle, the purchaser will be responsible for the shipping costs for the correct compressor, should the purchaser decide to purchase it.
