GALVANISED MALLEABLE IRON PIPE BSPT FITTINGS - 1/2", 3/4", 1" (BS EN10242)

Equal and Reducing (1/4" to 2")

 and

GALVANISED MILD STEEL PIPES threaded both ends - 1/2", 3/4", 1" carbon steel pipe/tube

Our Galvanised Malleable Cast Iron Pipe Fittings and steel pipes are used in threaded pipe connections, particularly:

-       in water supply systems

-       steam systems

-       central heating systems

-       sprinkler systems

-       to convey non-aggressive liquids and gases. 

-       Industrial style (steam punk) furniture manufacture

FITTINGS SPECIFICATIONS:

-        Colour: Galvanised (Silver)

-        Materials: Cast iron

-        Dimensions conforms to BS EN 10242

-        Banded "Heavy" (highest) specification

-        BSPT Taper/Taper Threaded (ISO 7-1)

-        Diameter (NPS): ½”, ¾” & 1” (note this is the nominal pipe size typically of the internal bore, see dimension table below)

-        Maximum Pressure at 300C = 10 bar

-        Maximum Pressure at 200C = 14 bar

-        Maximum Pressure at 120C = 20 bar

-        ISO 9001:2008 bsi and FM Accredited Manufacturer

STEEL PIPES SPECIFICATIONS:

-        Based EN10255 standard (not certified)

-        Screwed BOTH ENDS,THREADED BSPT (British Standard Pipe Tapered)

-        2.0mm wall thickness for ½” and ¾” and 1”

-        All pipes are galvanised internally and externally (expect the threads)

NOTE:

-        Royal Mail 48h is our standard delivery option, offer 2–3-day delivery service. Typically, 85% of deliveries occur within this time frame. Where delivery issues occur, we will help to resolve the problem directly with Royal Mail, but are unable to offer any refunds for items that do not arrive until a claim has been resolved with Royal Mail. Long parcels we're sending with Hermes.

-        For a quicker or more reliable service, we also offer Royal Mail Tracking 24h.

-        We do NOT supply material certificates

-        Unlike all the pipes and fittings we sell, the flanges are NOT pressure components, they are for furniture / home use only

-        Thread alignment is as specified in the industrial standard BS EN10242 (typically +/-0.5 degree), except for the floor flanges which are not manufactured to the tolerances defined by BS EN10242 and are not pressure components

-        Galvanised malleable iron fittings are manufactured from cast iron alloy, which is mainly composed of iron, carbon and silicon, having a high strength, good toughness, plasticity (not brittle) and machinability, Casting results in a slightly rough/frosted surface for added character, and will paint/powder coat with ease

-        Pipes are manufactured from mild (carbon) steel, galvanised internally and externally (expect threads)