Product Description:

Working voltage: DC 12V

Control current: 0-10A

Humidity range: 20-99% RH

Control accuracy: 1% RH

Size: 52 * 43 * 16mm

Product weight: About 28g

The probe can be inserted directly into the soil. This is a digital display of soil moisture. When the humidity is lower than the set value, start the pump to start watering, and stop watering when the humidity reaches the set value. The operation is very simple. This is intelligent and humanized.

matters needing attention:

Please follow the wiring diagram. You can choose the right wiring mode according to the load voltage

1. F0 set to stop humidity (the humidity of solenoid valve or water pump stops working)

Press the "set" button to display "F0" and press the "set" button to display the starting humidity. Press the + / button to "set" the humidity value

2. F1 set start humidity (humidity start of solenoid valve or pump)

Press the + / - key to switch to "F1", press the "set" key to display the stop humidity value, and press the + / key to set the humidity value

3. F2 humidity correction

There is no need to correct errors in normal use. Using multiple modules to correct the value at the same time is conducive to unified management and operation.

Quantity: 1pcs