Fitment:
| Year |
Model |
Genration |
Engine |
Quantity Per Vehicle |
| 1998-2000 |
Montero |
Gen2/2.5 |
3.5L SOHC V6 |
1 |
| 1996 |
Montero |
Gen2 |
3.0L V6 |
1 |
| 1998*-2004 |
Montero Sport |
|
3.0L V6, 3.5L V6 |
1 |
* Note - Although these manifolds will also bolt up perfectly for the 1997 Montero 3.5L, 1995 Montero 3.0L, 1997 - early 1998 Montero Sport 3.0L, those vehicles may not have had an EGR system so that is why they are not listed as compatible in the chart above. If you choose to use this manifold for those non-EGR Model/Year combinations you would need to create a plug for the EGR port at your own risk. The easiest way to do this is to purchase and modify an EGR Pipe (VP-LO-MR299615 https://www.ebay.com/itm/394319791566
By popular demand, we now have exhaust manifolds for the Gen2/2.5 3.5L SOHC V6 and Montero Sport 3.0L 24V and 3.5L SOHC V6s! These are made in the same factory as our popular Gen3 manifolds which we've been selling for years.
As you can see, these are not Swiss quality made parts. The castings will have imperfections and pits, the heat shield threads are often not perfectly centered, and there are visible hand grinding/finishing marks. But this unit will bolt up correctly and will get you back on the road for less than 1/2 the price of OEM.
2 Exhaust Manifold Flange studs are included: interchange Mitsubishi Part Number MR497545. Professional installation is highly recommended for these studs, they are much harder to install than the exhaust studs located on the engine cylinder heads because they must be driven deeper into harder metal which requires a lot of force and precision.
Don't forget the gaskets! For best results, using new gaskets (not included) ensures a proper seal. To purchase, check out our other listings:
Please use the compatibility/fitment charts above. These do NOT fit the 94-96 Montero with the 3.5L DOHC V6.
* Note - Although these manifolds will also bolt up perfectly for the 1997 Montero 3.5L, 1995 Montero 3.0L, 1997 - early 1998 Montero Sport 3.0L, those vehicles may not have had an EGR system so that is why they are not listed as compatible in the chart above. If you choose to use this manifold for those non-EGR Model/Year combinations you would need to create a plug for the EGR port at your own risk. The easiest way to do this is to purchase and modify an EGR Pipe (VP-LO-MR299615) https://www.ebay.com/itm/394319791566
Luso Overland
Hard to find Montero Parts: Tested, Approved, and Sold by real Montero Enthusiasts.