eBay

Heatmiser UH8-RF The Heatmiser UH8-RF is our 8 Zone wireless wiring centre designed to work with our Slimline-RF and neoAir Thermostats. The UH8-RF provides central switching and is therefore ideally situated next to the underfloor heating manifold. 8 zones can be controlled as well as providing an output for a hot water cylinder. On demand from any zone, a 230v output is provided to switch the relevant zone actuators, underfloor heating pump and valve. A volt free connection is supplied for the boiler, making it compatible with almost all types of boilers. The boiler signal can also be sent via RF to the RF Switch, providing the installer a totally wireless solution. Up to 6 actuators can be connected to each zone. An external aerial is available for use when the UH8-RF is being mounted in a metal cupboard or when the wireless signal is restricted. A software option in the thermostat allows you to configure which zones are underfloor heating and which zones are radiators. Radiator zones will not enable the underfloor heating pump, valve and boiler when there is a call for heat. Radiator zones should enable the boiler from the end switch of the valve. ---Central wiring for up to 8 zones ---DIN Rail Mounting Option (DIN Rail not included) ---Output for underfloor heating valve and pump activated when any thermostat calls for heat ---Wireless Fail Safe Function ---Wireless Boiler Link (RF Switch Optional) ---Works with our Slimline-RF and neoAir) ---Output for multiple radiator zones ---Output for domestic hot water ---Actuator outputs: 230v ---Dimensions (LxHxD) 384x148x60mm Wireless Thermostat - Heatmiser Slimline-RF The Heatmiser Slimline-RF wireless thermostat works with the Heatmiser RF Switch & UH8-RF Wireless Wiring Centre. The wireless thermostat is designed to be wall mounted in the area being controlled, up to 100 meters open space from the receiver. An optional repeater is available (Heatmiser Boost) in order to extend the communication distance. Features include ---Wireless Thermostat - 868MHz ---Distance: Up to 100 Meters Open Space ---Large Back Lit Display ---5/2 or 7 Day Programming Modes ---4 Comfort Levels per Day ---Optimum Start ---Wireless Fail Safe Function ---ºC/F Option ---05ºC - 35ºC Range ---Holiday Function ---Hold Function ---Wall Mount ---Frost Protection ---Key Lock Facility ---Battery: 2 x AAA (Included) ---Compatible with UH8-RF, Boost, RF Switch ---Remote Air Sensing Facility (Ideal for measuring the air temperature up to 20 meters from the thermostat. Remote sensor probe required, not included) ---Dimensions: 98mm x 85mm x 24mm (Height, Width, Depth) Important Please note there is no receiver included with this wireless thermostat. If you require a receiver, please select one from the option available above. ErP Class & Ratings Individual Product Multi Room Control with Individual Boiler Interlock I (1%) Class VIII (5%) HomeKit-Enabled neoHub (2nd generation) Heatmiser neoHub is the gateway to the Neo System, providing remote control of all neoStat's and neoPlug's from your iOS or Android device. The Heatmiser neoHub connects to your home broadband router and wirelessly to the neoStats in your home. No special computer knowledge is required, simply plug into your router, create a FREE account via the Neo app and then take control of your heating, hot water and appliances from anywhere. Key Features ---neoHub creates a Mesh Network to the powered Neo devices, greatly increasing the network range in your home. ---Smart Profiles - Allow you to program time and temperature settings and then apply them to a number of zones. Any subsequent change to the profile will be automatically applied to those zones using the profile. ---Geo Location: Automatically turn the heating off when you leave home and back on when you return. ---Compatible with up-to 32 Neo devices. ---Works with HomeKit, Google Home, Alexa, IFTTT. ---Automatic Firmware updates for neoHub and connected devices. ---Clock Sync and BST correction - UK/CET and NZ Time Zones. Enhanced History shows detailed information for your system for last 4 weeks. 1--The set temperature, indicated by the dotted line. 2--When the heating is preheating (warming your home ready for the start of your heating program) Shown in green. 3--When the heating is on, shown in red. 4--You can select a particular day by using the calendar button or you can press the -1 day +1 day to quickly jump back a few days. 5--Hours Run (the time the heating has been switched on) is shown for each day per zone. Push Notifications Push notifications are short messages that are sent directly to your phone based on a condition in your neoApp, such as high or low temperature, door open or low battery warning. High/Low temperature Alert: When the temperature in your home reaches your high or low temperature limit you will receive a push notification on your device. This will inform you of the location and device that triggered the alert. Window Open: If you have installed any Heatmiser Door/Window contact switches, you can select to receive a push notification whenever a door/window is opened. The push notification will re-trigger whenever the window or door is reopened. The notification will inform you of the location and device that triggered the alert. Low Battery: If you have any neoAir, wireless sensors or window/door contact switches installed, you can select to receive a push notification whenever the device requires new batteries. The push notification will be sent every 48 hours until the low battery warning is cleared. This will inform you of the location and device that triggered the alert. Compatibility ---Mobile apps: iOS 13+ iPhone/iPad | Android 8+ device ---Smart Home: HomeKit, Google Home, Alexa, IFTTT Included Accessories ---UK/EU Power Adaptor ---1m Ethernet Cable

Heatmiser UH8-RF

The Heatmiser UH8-RF is our 8 Zone wireless wiring centre designed to work with our Slimline-RF and neoAir Thermostats.

The UH8-RF provides central switching and is therefore ideally situated next to the underfloor heating manifold. 8 zones can be controlled as well as providing an output for a hot water cylinder. On demand from any zone, a 230v output is provided to switch the relevant zone actuators, underfloor heating pump and valve. A volt free connection is supplied for the boiler, making it compatible with almost all types of boilers. The boiler signal can also be sent via RF to the RF Switch, providing the installer a totally wireless solution.

Up to 6 actuators can be connected to each zone. An external aerial is available for use when the UH8-RF is being mounted in a metal cupboard or when the wireless signal is restricted.

A software option in the thermostat allows you to configure which zones are underfloor heating and which zones are radiators. Radiator zones will not enable the underfloor heating pump, valve and boiler when there is a call for heat. Radiator zones should enable the boiler from the end switch of the valve.

Central wiring for up to 8 zones
DIN Rail Mounting Option (DIN Rail not included)
Output for underfloor heating valve and pump activated when any thermostat calls for heat
Wireless Fail Safe Function
Wireless Boiler Link (RF Switch Optional)
Works with our Slimline-RF and neoAir)
Output for multiple radiator zones
Output for domestic hot water
Actuator outputs: 230v
Dimensions (LxHxD) 384x148x60mm

Wireless Thermostat - Heatmiser Slimline-RF

The Heatmiser Slimline-RF wireless thermostat works with the Heatmiser RF Switch & UH8-RF Wireless Wiring Centre. The wireless thermostat is designed to be wall mounted in the area being controlled, up to 100 meters open space from the receiver. An optional repeater is available (Heatmiser Boost) in order to extend the communication distance.

Features include

Wireless Thermostat - 868MHz
Distance: Up to 100 Meters Open Space
Large Back Lit Display
5/2 or 7 Day Programming Modes
4 Comfort Levels per Day
Optimum Start
Wireless Fail Safe Function
ºC/F Option
05ºC - 35ºC Range
Holiday Function
Hold Function
Wall Mount
Frost Protection
Key Lock Facility
Battery: 2 x AAA (Included)
Compatible with UH8-RF, Boost, RF Switch
Remote Air Sensing Facility (Ideal for measuring the air temperature up to 20 meters from the thermostat. Remote sensor probe required, not included)
Dimensions: 98mm x 85mm x 24mm (Height, Width, Depth)

Important

Please note there is no receiver included with this wireless thermostat. If you require a receiver, please select one from the option available above.

ErP Class & Ratings

Individual Product Multi Room Control with Individual Boiler Interlock

I (1%) Class VIII (5%)

HomeKit-Enabled neoHub (2nd generation)

Heatmiser neoHub is the gateway to the Neo System, providing remote control of all neoStat's and neoPlug's from your iOS or Android device.

The Heatmiser neoHub connects to your home broadband router and wirelessly to the neoStats in your home. No special computer knowledge is required, simply plug into your router, create a FREE account via the Neo app and then take control of your heating, hot water and appliances from anywhere.

Key Features

neoHub creates a Mesh Network to the powered Neo devices, greatly increasing the network range in your home.
Smart Profiles - Allow you to program time and temperature settings and then apply them to a number of zones. Any subsequent change to the profile will be automatically applied to those zones using the profile.
Geo Location: Automatically turn the heating off when you leave home and back on when you return.
Compatible with up-to 32 Neo devices.
Works with HomeKit, Google Home, Alexa, IFTTT.
Automatic Firmware updates for neoHub and connected devices.
Clock Sync and BST correction - UK/CET and NZ Time Zones.

Enhanced History shows detailed information for your system for last 4 weeks.

The set temperature, indicated by the dotted line.
When the heating is preheating (warming your home ready for the start of your heating program) Shown in green.
When the heating is on, shown in red.
You can select a particular day by using the calendar button or you can press the -1 day +1 day to quickly jump back a few days.
Hours Run (the time the heating has been switched on) is shown for each day per zone.

Push Notifications

Push notifications are short messages that are sent directly to your phone based on a condition in your neoApp, such as high or low temperature, door open or low battery warning.

High/Low temperature Alert: When the temperature in your home reaches your high or low temperature limit you will receive a push notification on your device. This will inform you of the location and device that triggered the alert.

Window Open: If you have installed any Heatmiser Door/Window contact switches, you can select to receive a push notification whenever a door/window is opened. The push notification will re-trigger whenever the window or door is reopened. The notification will inform you of the location and device that triggered the alert.

Low Battery: If you have any neoAir, wireless sensors or window/door contact switches installed, you can select to receive a push notification whenever the device requires new batteries. The push notification will be sent every 48 hours until the low battery warning is cleared. This will inform you of the location and device that triggered the alert.

Compatibility

Mobile apps: iOS 13+ iPhone/iPad | Android 8+ device
Smart Home: HomeKit, Google Home, Alexa, IFTTT

Included Accessories

UK/EU Power Adaptor
1m Ethernet Cable