




Great Compatibility:
Works on John Deere models 3010 3020 4000 4010 4020 4320 4520 4620 4230 4430.
For John Deere models 4630 8430 4040 4240 4440 4640 4840 8440 (4050 W/466 ONLY) 4250.
Also For John Deere models 4450 4650 4850 8450 4055 4255 4455 4555 4755 4955 4560 4760 4960 and many more AG & Industrial equipment using the 270 404 466 6076 7.6L 8.1L engines.
Powerful Function:
Used to easily replace and install the crankshaft rear oil seal and wear sleeve, saving your time and energy.
Compatible with John Deere tractors and combines, keeping your equipment running smoothly for a long time.
Superior Material:
Constructed with high quality carbon steel
Surface with black finish, resisting rust and corrosion.
With great strength and durability for long term reliable service.
|
|
|
|---|---|---|
Crankshaft Rear Oil Seal and Wear Sleeve (Not Includes) Seal (A) and wear sleeve (B) are assembled. DO NOTSEPARATE. If parts become separated, discard and replace with a new assembly. (Attempts to reassemble will cause the wear sleeve to damage the seal allowing engine oil to leak past seal.) Oil seal/wear sleeve assembly MUST BE installed with the JDG476(85) Crankshaft Rear Oil Seal Installation Tool Set for correct installation to avoid leaking. | Installing Crankshaft Rear Oil Seal/Wear Sleeve without Removing Engine Step 1. Apply a light coating retaining compound around the leading edge of crankshaft flange and wipe away extra sealant. Step 2. Install JDG477 (85) Pilot (A) on end of crankshaft using the Allen head cap screws (B) supplied with toolset. Tighten cap screws securely Step 3. Carefully start oil seal/wear sleeve assembly (C) overJDG477 (85) Pilot and crankshaft with open side of seal toward engine. | Crankshaft Rear Oil Seal/Wear Sleeve Installed Step 4. Position JDG478 Driver (A) so that hole in the cross plate goes over threaded stud of pilot. Install washer and nut on stud. Step 5. Tighten nut to draw JDG478 Driver in until crossbar bottoms on JDG477 (58) Pilot. When the tool bottoms, seal and wear ring assembly (B) will be correctly positioned. Step 6. Remove JDG476 (85) Tool Set from engine. |

1. Payment methods accepted: Payoneer. Our Payoneer account allows you to pay by credit card, debit card and your paypal balance.
2. All major credit cards are accepted through our secure payment processor Payoneer.
3. We ship items to Your Ebay address.Please make sure your Ebay address is correct before you pay, cause it cannot be changed once the order shipped out.
1. Item will be shipped out within 1-2 business days after clear payment received.
2. Please make sure shipping address on your Ebay account is correct & up-to-date.
3. All of our items are shipped from our US warehouse.
4. Please feel free to contact us via ebay using "Contact member" if you cannot get your order in time.
1. Return to us within 60 days from the delivery date for exchange or refund. Refund will be given as Money back or item exchange (buyer's choice).
2. Return shipping fee is the responsibility of buyer unless the return is a result of our mistake. And all non seller mistake returns for refund are subject to 20% re-stocking fee.
3. If you need return, please contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation.
Please contact us via ebay using "Contact member".
We will respond within 1 business day or less.Thank you for your understanding.
Our office hours is as below:
- 9:00 a.m. to 6:00 p.m. (GMT +8) of Monday to Friday
- 9:00 a.m. to 1:00 p.m. (GMT +8) of Saturday
And our office is closed on Sunday and public holidays (Hong Kong)
We apologize for the late reply during the holidays.
Please include your ebay item number or order number in all communications.

