PCA9685 PWM Controller Servo Driver 16-Channel 12 bit PWM I2C Interface Fit for Arduino Raspberry AU Stock

Description:

16 LED drivers with programmable LED brightness, each output programmable: On/Off.

Programmable group blur (dim) / flashing mixed with independent LED brightness.

The 1MHz Fast Mode Plus is compatible with the I2C bus interface with 30mA high drive capability on SDA to drive high capacitive buses.

The output state can be programmed to change when responding or stopping a command to achieve simultaneous update of all outputs or byte-by-byte update output (default is "stop command change").

Each LED output achieves 4096-level (12-bit) linear programmable brightness from fully off (default) to maximum brightness.

Low effective output enable input pin, when the pin is high, the LED output can be programmed to 0, 1 or high impedance (power-on default is high impedance).

The LED output frequency (all LEDs) is typically 40Hz to 1000Hz (when the oscillator is 25MHz, the default value of the prescaler register is 1EH and will generate a 200Hz refresh rate).

Software programmable for open-drain LED output selection (default push-pull) of 16 push-pull outputs (25mA sink current and 5mA pull current at 5V), no input function.

Six hardware address pins allow 62 PCA9685 devices to be connected to the same I2C bus.

Maximum external input clock of 50MHz is allowed.

Internal power-on reset.

There is a noise filter at the SDA/SCL input.

There is no glitch output when powering up.

25MHz internal crystal oscillator without external devices


Specification:

Operating voltage range: 2.3V-5.5V (can withstand 5.5V input)

Working temperature: -40 - 85 °C

ESD protection: over 2000V HBM/JESD22-A114, 200V MM/JESD22-A115 and 1000V CDM/JESD22-C101

JEDEC standard: JESD78 enters lock test when it exceeds 100mA

Package: TSSOP28 and HVQFN28

Board size: 6.2*2.5*0.2cm


Package:

1 x PWM Module
6 x Pin
1 x Control Module



Payment:

 1. We accept PayPal payment only, and must be received within 3 days from the date of purchase.
 2. Please leave note in PayPal when making the payment if you have any special requests.
 3. Orders will be processed instantly and dispatched within 1-2 days, so we do NOT accept any email/message note after you place orders.

Shipping:
1. We offer Within Australia only.
2. Orders will be processed and dispatched ASAP(within 12 hours at most) after payment is clear.

We offer Free Express delivery For these metropolitan area: 3083,3082,3087,3086,3074,3073,3060,3061

3. We only ship to confirmed eBay addresses. Your eBay address MUST MATCH your Shipping address.
4. If you have not received your shipment within 60 business days from payment, please contact us. We will track the shipment and get back to you as soon as possible. Our goal is customer satisfaction!
5. Please note that estimated delivery time is depended on destination countries, and may subject to customs clearance process, and weather condition in your area.
6. Free Postage with Tracking label & Packing & Fast Shipping,Australia Post.
7. Plz note, some Post transfer centre Don't update tracking information, don't worry we will ensure you can receive your items.

RETURNS:
1.  We offer 60 days return policy. Please contact us within 60 days t from the date you receive your order if you have any issues with the product and would like to return.
2.  All returned items MUST BE in the original packaging and you MUST PROVIDE us with the shipping tracking number, specific reason for the return, and your eBay ID.
3.  We will refund YOUR FULL WINNING BID AMOUNT, upon receipt of the item in its original condition and packaging with all components and accessories included, AFTER BOTH Buyer and Seller cancel the transaction from eBay. OR, you may choose to have a replacement.
4. Buyer is responsible for return shipping cost.