AUcontrols Made in USA.

Static Phase Converter Mod. ASPC-3HD.
Runs 230VAC 3-Phase Motors with 230VAV Single Phase Power!

Run a 1 to 3 HP, 3-Phase motor at 2/3 of Motor's rated HP.

DESIGNED FOR 3-PHASE MOTORS ONLY and FOR LIGHT TO MEDIUM LOADS.

Static Phase Converters will ONLY GIVE 2/3 of the Motor's Rated HP!

Power Supply: Single Phase 208 - 240 VAC, 50/60 Hz.

HP Range: Min: 1 Max: 3

Single Phase FLA: 9.3 Amps.

Dimensions: 6" X 6" X 4"

1 Year Warranty.

IMPORTANT:

> Do not buy a bigger Static Phase Converter than your Motor's HP thinking that you will get more power . It will NOT run, nor get a smaller Converter because it will not work either! Static Phase Converters DO NOT generate the 3rd Phase!

>Your Motor HP has to be between the Static Phase Converter HP to run properly.
> If you are using a Motor Starter make sure the Motor Starter's Contactor's coil is fed from L1 & L2 (230VAC) otherwise it will not start.
> You Can Run: Lathes not fitted with clutch, Milling & Drilling machines, Saws, etc.

> For Air Compressors, blowers, water pumps and hyraulic pumps with pulley, the Motor's pulley diameter MUST BE REDUCED 1/3 or a 50% larger Motor can be fitted.
You can use your motor with heavy starting cyles, frequent starting, instant reversing, etc.

Keep in mind that Static Phase Converters will ONLY GIVE 60% OF MOTOR's rated HP.