AC Compressor For Toyota Sienna 04-06 V6 3.3L 2007 V6 3.5L OEM 10S20C 97310
Specifications
Clutch Diameter (mm): 120
Compressor Mount: Tangent
Grooves: 6
Feature:
*Condition: 100% Brand New and High Quality.
*According to the original factory specifications.
*Perfect match for the original car.
*Stable characteristics, high reliability.
*Replace OEM Number:
97310, 471-1010, CO 10854C, 034958, CO 10854RE
*Condition: 100% Brand New and High Quality.
*According to the original factory specifications.
*Perfect match for the original car.
*Stable characteristics, high reliability.
*Replace OEM Number:
97310, 471-1010, CO 10854C, 034958, CO 10854RE
Package Content
1 x A/C Compressor
Fitment:
2004-2006 Toyota Sienna 3.3L
2007 Toyota Sienna 3.5L (To 12/15/2006;)
OEM and Competitor Interchange:
Austin Baker: 10345130
Austin Baker: 10349581
Autocomp Technologies: 1010854
Autocomp Technologies: 1110854
Autocomp Technologies: 1210854
Compressor Works: 639320
Denso Automotive Systems: 4711010
Four Seasons: 97310
Four Seasons: 98310
GAC: 22659
Global Parts Distributors: 5512103
Global Parts Distributors: 6512103
Global Parts Distributors: 7512103
Hodyon: 295943NH
NAPA: 255485
NAPA: 275555
NAPA: TEM255485
NAPA: TEM275555
Omega: 2011282
Omega: 2011282AM
Omega: 2011282R
Ranshu: 140135
Ranshu: 140135C
Ranshu: 140135NC
Ranshu: 140135NEW
Ready-Aire/Proliance: 1417N
Spectra Premium: 0610097
Tech Choice Parts: 23618
Toyota/Lexus: 8832008051
Toyota/Lexus: 8841008030
Trad Automotive: C1349
Trad Automotive: C1349R
UAC: CO 10854C
COMPRESSOR INSTALLATION INSTRUCTIONS
Please read these instructions prior to any repairs on your vehicle.
Follow all federal, state, and local regulations when repairing an automotive A/C system.
Take appropriate safety precautions –
1. Wear eye protection (safety glasses).
2. Do not smoke next to the vehicle when performing repairs.
3. Work in a well-ventilated area.
4. Wear skin protection (such as gloves and closed toe shoes).
5. Recover refrigerant before making repairs.
REMOVING THE OLD COMPRESSOR
1. Open the hood of the vehicle and locate the A/C Compressor.
2. Remove the A/C belt from the A/C Compressor pulley. This may involve loosening the belt tensioner (if it is equipped).
3. Evacuate the A/C system using a refrigerant recovery machine.
4. Disconnect the negative battery cable.
5. Remove the bolt that secures refrigerant lines to the A/C Compressor. Then, inspect the A/C lines for any contamination such as metal or excessive dirt inside them. If any contamination is found, the system will need to be cleaned.
6. Disconnect any electrical connectors from the A/C Compressor.
7. Remove the AC Connections. Remove the A/C Compressor mounting bolts.
8. Remove the A/C Compressor from the vehicle.
INSTALLING THE NEW or REMANUFACTURED A/C COMPRESSOR
1. Once the old compressor has been removed, begin by removing the receiver/drier or accumulator, and the expansion valve or orifice tube from the vehicle.
2. Next, flush the condenser and evaporator using a non-oil based A/C flush. The valve must be removed on expansion valve system before the evaporator can be flushed.
Flush evaporators from inlet to outlet.
Flush condensers from outlet to inlet.
NOTE: Condensers produced from 1990 – present are extremely difficult to clean. As a result, if the compressor had a major failure, it is recommended that the condenser be replaced.
3. This compressor comes pre-filled with the correct amount of oil. Thus, there is no need to add any additional oil to your system.
4. Install the new receiver drier or accumulator, and new expansion valve or orifice tube.
5. Next, install the new or remanufactured A/C Compressor.
6. Install and tighten the A/C Compressor mounting bolts.
7. Reconnect any electrical connectors to the A/C Compressor.
8. Re-install the refrigerant lines and A/C belt to the A/C Compressor.
9. Reconnect the negative battery cable.
10. Evacuate the A/C system with an A/C servicing machine for at least one hour.
11. Check the system for leaks.
12. If there are no leaks, install the refrigerant charge (Check the A/C system sticker under the hood of the vehicle for the proper amount and type of refrigerant for the system). Then, let the system set for 2 minutes. Doing so will allow the refrigerant to carry the oil and spread more evenly throughout the system.
13. Start the vehicle’s engine and turn on the A/C system.
Make sure the windows and doors of the vehicle are open.
Should you have any questions regarding the installation of your new or remanufactured compressor, please do not hesitate to contact us.
Frequently Asked Questions
Q. Does the compressor come with oil?
A. Yes! This compressor comes pre-filled with the correct amount of oil. Thus, there is no need to add any additional oil to your system.
Q. Does the compressor come with the clutch and pulley?
A. Yes, all of our compressors come complete with the clutch and pulley unless otherwise advertised.
Q. How long does shipping take?
A. Shipping usually takes anywhere from 1 to 5 business days. The amount of time it takes for the compressor to reach your destination depends on your location.
Q. Do you accept returns?
A. Yes, we accept returns within 14 days of purchase on all unused items. Any product you return must be in the same condition you received it and in the original packaging. A return authorization number (RMA #) is required from A/C Compressors prior to returning any merchandise. Your request to return these parts must be received by us within 14 days from the date of purchase. The purchaser is responsible for shipping charges to return all parts. Returned items that are found to have been installed, dirty, tampered with, locked up, or physically damaged will not be refundable.
Q. What is the return shipping address?
Online Seller RMA , 41 logistics Blvd, Suite A-2 #44364006 , Walton Kentucky 41094 US
NOTE: In order to determine if you are purchasing the correct part, please provide us with the year, make, model, and engine size of your vehicle. Failure to do so will result in the purchaser being responsible for any and all fees associated with returning the item for a refund. If the purchaser does not send us the year, make, model, and engine size and the purchaser receives a compressor which does not fit the purchaser's vehicle, the purchaser will be responsible for the shipping costs for the correct compressor, should the purchaser decide to purchase it.
