Store Categories
Store Newsletter
Why Buy From us
JMC 1714oz-in Closed Loop Stepper Motor NEMA34 12NM Hybrid Servo Driver Kit 2ph
Items Description

NEMA34 Closed Loop Stepper Motor+Hybrid Servo Drive Kit 12Nm 8.5Nm 4.5Nm 3Nm

 

we offer two-year warranty

Here is the Link Handheld Intelligent Setting Unit

If you need extender power cable and encoder cable, you can pay the extra payment on this link
$5 for each extender 1M encoder cable and 1M power cable

 

Features
1.Full closed loop control, motor encoder with 1000 line, close to 100% of the torque output
2.Segment set range is 2-256, fast response, high speed, light isolation fault alarm output interface ALM
3.Current loop bandwidth (-3 db) 2 KHZ (typical), speed loop bandwidth 500 hz (typical), the position loop bandwidth 200 hz (typical)
4.RS232 serial port communication available to download or change parameters; Over-current, over-voltage, undervoltage, overheating, speeding, differential protection; Alarm clear input ENA
 
Drive specification
Model Current Voltage Matched motor Weight Dimension Control signal
2HSS57 0-6A DC(24-48V) 57.86mm 0.27kg 118*75.5*34 Differential
2HSS86 0-6A DC(24-80V) 57.86mm 0.57kg 150*97.5*53 Differential
2HSS86H 0-7A DC(40-110V) 57.86.110mm 0.60kg 150*97.5*53 Differential
2HSS1108H 0-8A AC(80-220V) 86.110mm 1.50kg 181*140*70 Differential
2HSS2208H 0-8A AC(110-240V) 110.130mm 1.50kg 181*140*70 Differential
 
Motor specification
model Step Angle Holding Torque Current/ Resis Inductance/Phase Detent Torque Rotor Inetria
Phase Tance/ Phase
57J1854EC-1000 1.8 0.9NM 2.8A 0.4 1.2 400 280
57J1880EC-1000 1.8 2.2NM 4A 0.35 1.8 700 480
86J1880EC-1000 1.8 4.5NM 4A 0.4 3.5 1300 1400
86J1895EC-1000 1.8 7NM 5A 0.37 3.3 2000 1850
86J18118EC-1000 1.8 8.5NM 5A 0.44 4.4 2500 2700
86J18156EC-1000 1.8 12NM 6A 0.72 5.5 4000 4000
 
 
Brief introduction
2HSS two phase hybrid stepper servo drive system integrated servo control technology into the digital step driver. It adopts typical tricyclic control method which include current loop,speed loop and position loop.This product has the advantage of both step and servo system, is a highly cost-effective motion control products.

Main application fields
Advertising industry, Engraving, packaging, lasers, electron industry, medical industry, Printing industry, woodworking, machinery industry, Ceramic Industry, stone industry and so on.
 

QA:

1.Power LED does not light after power
1.Check the connection of the power line.
2.the voltage maybe too low

2.Red light warning
1.check the connection of the motor with power,
2.input voltage of the driver maybe too high or too low

3.The motor do not turn when the pulse input
1.Whether the pulse input of the driver is connected stably
2.Whether the input way in the system configuration of the driver is pulse input
3.Whether the motor can be released

4.Red light alarm after running a small angle
1.Whether the phase wire of the motor is correctly connected. If it is not correct, please refer to the motor phase and the corresponding phase sequence of the driver.
2.In the driver configuration parameters, whether the number of motor encoder lines is consistent with the connected motor parameters. If they are different, you need to reset them.
3.Whether the pulse input speed is greater than the rated speed of the motor

 

1.Orders will be shipped out within 5 working days once payment received. Please make sure the phone number is valid.

2.We Will ship by DHL, FedEx, UPS, EMS( we will choose the best way to ship the items ASAP).

3.Kindly please note the tax fee and clearance fee are not included in the item price.

4.There will be remote fee if your address is remote area.
Only Paypal is accepted.
If you need other payment terms, please leave message to us.

Normally we provide 12 months warranty, some regular items even up to 24 months.Please see the details above.

Products are tested before shipping ,and we guarantee our products are in good working condition.

If the product you received is defective caused by shipping, please contact us before you return to us. We will RESEND the good product to you ASAP or will full refund you the payment. 

Fast To Buy is a worldwide industrial products online store of over million configurable and standard components. We are a leading provider for industrial automation control, CNC machine and electrical equipment. Each product, in which FastToBuy sales online, is subject to a 100% quality control. 

we have enough stock, if you want to buy more, please feel free to contact us,we will add the quantity.

 

We will reply you ASAP. If no response within 24 Hours, please check the spam in your mail box.

We strive to maintain the highest standards of excellence for shopping experience and 100% customer satisfaction!
Positive feedback is very important to us. We sincerely request that you contact us immediately before you give us neutral or negative feedback, so that we can satisfactorily solve your concerns.
For anything questions about product, price, shipping or order status, please send ebay message to us.

 
Copyright fasttobuy 20208 rights reserved.
PushAuction

On Nov-15-21 at 01:05:27 PST, seller added the following information:

DataCaciques