A/C Compressor Clutch Repair Kit For 2005-2009 Subaru Legacy Outback 4CYL 2.5L 73111AG000
 
 
▲Replace part numbers:

73111AG000
 

▲Fitment:

    2008-2009 Subaru Legacy 2.0L)
    2005-2009 Subaru Legacy 2.5L)
    2005-2009 Subaru Outback 2.5L)

 
 
OEM and Competitor Interchange:

    Austin Baker: 10361570
    Autocomp Technologies: 1011036
    Autocomp Technologies: 1111036
    Autocomp Technologies: 1211036
    Compressor Works: 639424
    Denso Automotive Systems: 4711609
    Four Seasons: 157383
    Four Seasons: 158383
    Four Seasons: 97353
    Four Seasons: 98353
    Global Parts Distributors: 5512425
    Global Parts Distributors: 6512425
    Global Parts Distributors: 7512425
    NAPA: 255648
    NAPA: 276026
    NAPA: TEM255648
    NAPA: TEM276026
    Omega: 2021886
    Omega: 2021886R
    Omega: 2022149R
    Ranshu: 140382
    Ranshu: 140382C
    Ranshu: 140382NC
    Ranshu: 140382NIP
    Subaru: 73111AG000
    Subaru: 73111AG001
    Subaru: 73111AG030
    Trad Automotive: C1874
    UAC: CO 11036C

Technical Specifications:

    Discharge Port (mm): 15.5
    Grooves : 4
    Pulley Diameter (mm): 110
    Suction Port (mm): 18
    Voltage: 12

 

Package Included:

A/C Compressor Clutch Kit as pictures
 
 
How to replace with new AC compressor Clutch 

1) Always wear goggles and start with the installation tool. 
2) Remove the clutch rotor using a puller. 
3) Remove the bearing from the clutch rotor. 
4) Measure the gap between the friction surfaces of the compressor clutch. 
5) Ohm check single-line AC compressor clutch coil, ground is supplied through the compressor main body. 
6) Two high pressure cut-off switches. If the system pressure is too high, the single function switch will interrupt the compressor function. The dual function switch first engages the high speed cooling fan in an attempt to reduce the pressure by increasing the heat transfer at the condenser. However, if the system pressure continues to rise after the fan is turned on, the switch will interrupt compressor operation. 
7) Hold the clutch hub with the appropriate tool while removing the bolt or nut. 
8) Use a puller to remove the clutch plate and hub. 
9) It is also recommended to search for relevant installation videos on the Internet.
 

Warm Notice:

Due to the complexity and security of installing the AC Compressor Clutch.

We highly suggest it should be operated by a certified technician.

Please check the compatibility list on the listing page to make sure your exact model is included.

If you can't confirm,welcome to email us, informing us the VIN# or year/make/model/trim/engine of your car.
 
PushAuction