This A/C compressor is fit for For Jeep Wrangler 1985-1990. Each product is tested strictly.
 

Specifications
 

    Clutch Diameter (mm): 119
    Gauge Line (mm): 36
    Grooves : 7
    MOUNT TYPE: Ear
    Port Type: Vertical
    Ports (in): 3/4 x 7/8
    Refrigerant: R12
    Switch (Yes / No): Yes
    Type: Piston
    Voltage: 12
 
 
Package Content

        1 x A/C Compressor
 
 
 
OEM and Competitor Interchange:


     AC Delco: 1521110
    AC Delco: 1521798
    Alliance: ABPN83304462
    Austin Baker: 10301731
    Autocomp Technologies: 2789632
    Autocomp Technologies: 2789663
    Autocomp Technologies: 2789693
    Bergstrom: 525759
    Bergstrom: 525915
    Carrier: 512029
    Caterpillar: 3301106
    Compressor Works: 618589
    Coolstar: 3301106
    Four Seasons: 57589
    Four Seasons: 58589
    Freightliner: 304152
    Freightliner: ABPN83304152
    Freightliner: SKI9537
    Frigette: 204253
    Global Air Inc.: CO2502
    Global Cool Cars: 0938Z0114
    Global Parts Distributors: 5511565
    Global Parts Distributors: 6511565
    Global Parts Distributors: 7511565
    Hesston: 259379
    International: 1682425C92
    Kysor: 1401015
    Kysor: 1401017
    Kysor: 402792
    MEI: 5937
    NAPA: 274144
    NAPA: TEM274144
    Navistar: 1682425C92
    Navistar: 1684560C92
    Omega: 2010107
    Omega: 2010107AM
    Omega: 2010107R
    Peterbilt: 9537SAN
    Peterbilt: LE1090
    Ranshu: 14SD9537
    Ranshu: 14SD9537NEW
    Ready-Aire/Proliance: 2168N
    Red Dot: 75R8272
    Red Dot: 75R8272DS
    Red Dot: RD556960
    Red Dot: RD556960DS
    Red Dot: RD556960P
    Sanden: 9537
    Sunair: CO2216CA
    Trad Automotive: C816
    TruckAir: 023172
    TruckAir: 033084
    TTAC: 3004186
    Visteon: 010246
    Volvo: 3918287
    UAC: CO 9537C
 
 
COMPRESSOR INSTALLATION INSTRUCTIONS


Please read these instructions prior to any repairs on your vehicle.


Follow all federal, state, and local regulations when repairing an automotive A/C system.


Take appropriate safety precautions –

1. Wear eye protection (safety glasses). 

2. Do not smoke next to the vehicle when performing repairs.

3. Work in a well-ventilated area.

4. Wear skin protection (such as gloves and closed toe shoes).

5. Recover refrigerant before making repairs.



REMOVING THE OLD COMPRESSOR


1. Open the hood of the vehicle and locate the A/C Compressor.

2. Remove the A/C belt from the A/C Compressor pulley. This may involve loosening the belt tensioner (if it is equipped).

3. Evacuate the A/C system using a refrigerant recovery machine.

4. Disconnect the negative battery cable.

5. Remove the bolt that secures refrigerant lines to the A/C Compressor. Then, inspect the A/C lines for any contamination such as metal or excessive dirt inside them. If any contamination is found, the system will need to be cleaned.

6. Disconnect any electrical connectors from the A/C Compressor.

7. Remove the AC Connections. Remove the A/C Compressor mounting bolts.

8. Remove the A/C Compressor from the vehicle.

​​​​​​​



INSTALLING THE NEW or REMANUFACTURED A/C COMPRESSOR


1. Once the old compressor has been removed, begin by removing the receiver/drier or accumulator, and the expansion valve or orifice tube from the vehicle. ​​​​​​​

2. Next, flush the condenser and evaporator using a non-oil based A/C flush. The valve must be removed on expansion valve system before the evaporator can be flushed.

    Flush evaporators from inlet to outlet.
    Flush condensers from outlet to inlet.


NOTE: Condensers produced from 1990 – present are extremely difficult to clean. As a result, if the compressor had a major failure, it is recommended that the condenser be replaced.


3. This compressor comes pre-filled with the correct amount of oil. Thus, there is no need to add any additional oil to your system. 

4. Install the new receiver drier or accumulator, and new expansion valve or orifice tube.

5. Next, install the new or remanufactured A/C Compressor.

6. Install and tighten the A/C Compressor mounting bolts.

7. Reconnect any electrical connectors to the A/C Compressor.

8. Re-install the refrigerant lines and A/C belt to the A/C Compressor.

9. Reconnect the negative battery cable.

10. Evacuate the A/C system with an A/C servicing machine for at least one hour.

11. Check the system for leaks.

12. If there are no leaks, install the refrigerant charge (Check the A/C system sticker under the hood of the vehicle for the proper amount and type of refrigerant for the system). Then, let the system set for 2 minutes. Doing so will allow the refrigerant to carry the oil and spread more evenly throughout the system. ​​​​​​

13. Start the vehicle’s engine and turn on the A/C system.

    Make sure the windows and doors of the vehicle are open.



Should you have any questions regarding the installation of your new or remanufactured compressor, please do not hesitate to contact us.

 
 
Frequently Asked Questions
 
 

Q. Does the compressor come with oil?

A. Yes! This compressor comes pre-filled with the correct amount of oil. Thus, there is no need to add any additional oil to your system. 


Q. Does the compressor come with the clutch and pulley?

A. Yes, all of our compressors come complete with the clutch and pulley unless otherwise advertised.


Q. How long does shipping take?

A. Shipping usually takes anywhere from 1 to 5 business days. The amount of time it takes for the compressor to reach your destination depends on your location.


Q. Do you accept returns?

A. Yes, we accept returns within 14 days of purchase on all unused items. Any product you return must be in the same condition you received it and in the original packaging. A return authorization number (RMA #) is required from A/C Compressors prior to returning any merchandise. Your request to return these parts must be received by us within 14 days from the date of purchase. The purchaser is responsible for shipping charges to return all parts. Returned items that are found to have been installed, dirty, tampered with, locked up, or physically damaged will not be refundable.


Q. What is the return shipping address?

Online Seller RMA ,  41 logistics Blvd, Suite A-2  #44364006 ,  Walton  Kentucky  41094  US


NOTE: In order to determine if you are purchasing the correct part, please provide us with the year, make, model, and engine size of your vehicle. Failure to do so will result in the purchaser being responsible for any and all fees associated with returning the item for a refund. If the purchaser does not send us the year, make, model, and engine size and the purchaser receives a compressor which does not fit the purchaser's vehicle, the purchaser will be responsible for the shipping costs for the correct compressor, should the purchaser decide to purchase it. 
PushAuction