This A/C compressor is fit for Ford Expedition, F-150, F-250, F-350, F-450, F-550, F53. Each product is tested strictly.
 

Specifications
 

    Discharge Port (mm): 16
    Gauge Line (mm): 72
    Grooves : 6
    Pulley Diameter (mm): 115
    Suction Port (mm): 18
    Type: Piston
    Voltage: 12

 
 
Package Content

        1 x A/C Compressor
 
 

Fitment:
 
    2007-2014 Ford Expedition 5.4L
    2009-2010 Ford F-150 4.2L
    2007-2010 Ford F-150 4.6L
    2007-2010 Ford F-150 5.4L
    2010-2014 Ford F-150 6.2L
    2007-2009 Ford F-250 4.6L
    2008-2010 Ford F-250 Super Duty 6.4L
    2007-2007 Ford F-250 Super Duty 6.8L (with 6 Groove Pulley;)
    2008-2009 Ford F-350 5.4L
    2008-2010 Ford F-350 Super Duty 6.4L
    2007-2007 Ford F-350 Super Duty 6.8L (with 6 Groove Pulley;)
    2008-2010 Ford F-450 Super Duty 6.4L
    2006-2007 Ford F-450 Super Duty 6.8L (From 12/05/2005;)
    2008-2010 Ford F-550 Super Duty 6.4L
    2006-2007 Ford F-550 Super Duty 6.8L (From 12/05/2005;)
    2009-2009 Ford F53 6.8L
    2015-2017 Ford Lobo 3.5L
    2002-2010 Ford Lobo 4.6L
    2001-2010 Ford Lobo 5.4L
    2011-2014 Ford Lobo 6.2L
    2007-2008 Lincoln Mark LT 5.4L
    2007-2014 Lincoln Navigator 5.4L
 
 
OEM and Competitor Interchange:


    Austin Baker: 10361780
    Austin Baker: 10361781
    Autocomp Technologies: 1010859
    Autocomp Technologies: 1010905
    Autocomp Technologies: 1110859
    Autocomp Technologies: 1110905
    Autocomp Technologies: 1210859
    Autocomp Technologies: 1210905
    Autocomp Technologies: 68192
    Compressor Works: 639381
    Compressor Works: 639384
    Denso Automotive Systems: 4716052
    Ford: 7C3Z19703AA
    Ford: 8C3Z19703A
    Ford: 8L3Z19703C
    Ford: 9C3Z19703A
    Ford: 9L1Z19703A
    Ford: 9L1Z19703B
    Ford: 9L3Z19703C
    Ford: 9L3Z19703E
    Ford: A1Z19703B
    Ford: AL1Z19703A
    Ford: AL1Z19703B
    Ford: BL3Z19703C
    Four Seasons: 67192
    Four Seasons: 68192
    General Motors: 9L1Z19703A
    Global Cool Cars: 0907F0108
    Global Parts Distributors: 5512363
    Global Parts Distributors: 5512617
    Global Parts Distributors: 6512617
    Global Parts Distributors: 7512363
    Global Parts Distributors: 7512617
    Halla Climate Corporation: F500JB2AA04P
    MEI: 5440
    Motorcraft: YC2526
    Motorcraft: YC2545
    Motorcraft: YC2551
    Motorcraft: YC2557
    Motorcraft: YCC250
    Motorcraft: YCC254
    Motorcraft: YCC272
    Motorcraft: YCC275
    Motorcraft: YCC320
    Motorcraft: YCC355
    NAPA: 255291
    NAPA: 255790
    NAPA: 275574
    NAPA: 275897
    NAPA: TEM255291
    NAPA: TEM255790
    NAPA: TEM275574
    NAPA: TEM275897
    Omega: 2011041
    Omega: 2011041AM
    Omega: 2022116
    Oreilly Auto Parts: 67192
    Ranshu: 140326
    Ranshu: 140326C
    Ranshu: 140326NC
    Ranshu: 143552
    Ranshu: 143552C
    Ranshu: 143552NC
    Ranshu: 143552NEW
    Spectra Premium: 0610243
    Spectra Premium: 0610250
    Trad Automotive: C1750
    Trad Automotive: C1750R
    Trad Automotive: C1947
    Trad Automotive: C1947R
    Valeo: 700731
    UAC: CO 10905C
 
 
COMPRESSOR INSTALLATION INSTRUCTIONS


Please read these instructions prior to any repairs on your vehicle.


Follow all federal, state, and local regulations when repairing an automotive A/C system.


Take appropriate safety precautions –

1. Wear eye protection (safety glasses). 

2. Do not smoke next to the vehicle when performing repairs.

3. Work in a well-ventilated area.

4. Wear skin protection (such as gloves and closed toe shoes).

5. Recover refrigerant before making repairs.



REMOVING THE OLD COMPRESSOR


1. Open the hood of the vehicle and locate the A/C Compressor.

2. Remove the A/C belt from the A/C Compressor pulley. This may involve loosening the belt tensioner (if it is equipped).

3. Evacuate the A/C system using a refrigerant recovery machine.

4. Disconnect the negative battery cable.

5. Remove the bolt that secures refrigerant lines to the A/C Compressor. Then, inspect the A/C lines for any contamination such as metal or excessive dirt inside them. If any contamination is found, the system will need to be cleaned.

6. Disconnect any electrical connectors from the A/C Compressor.

7. Remove the AC Connections. Remove the A/C Compressor mounting bolts.

8. Remove the A/C Compressor from the vehicle.

​​​​​​​



INSTALLING THE NEW or REMANUFACTURED A/C COMPRESSOR


1. Once the old compressor has been removed, begin by removing the receiver/drier or accumulator, and the expansion valve or orifice tube from the vehicle. ​​​​​​​

2. Next, flush the condenser and evaporator using a non-oil based A/C flush. The valve must be removed on expansion valve system before the evaporator can be flushed.

    Flush evaporators from inlet to outlet.
    Flush condensers from outlet to inlet.


NOTE: Condensers produced from 1990 – present are extremely difficult to clean. As a result, if the compressor had a major failure, it is recommended that the condenser be replaced.


3. This compressor comes pre-filled with the correct amount of oil. Thus, there is no need to add any additional oil to your system. 

4. Install the new receiver drier or accumulator, and new expansion valve or orifice tube.

5. Next, install the new or remanufactured A/C Compressor.

6. Install and tighten the A/C Compressor mounting bolts.

7. Reconnect any electrical connectors to the A/C Compressor.

8. Re-install the refrigerant lines and A/C belt to the A/C Compressor.

9. Reconnect the negative battery cable.

10. Evacuate the A/C system with an A/C servicing machine for at least one hour.

11. Check the system for leaks.

12. If there are no leaks, install the refrigerant charge (Check the A/C system sticker under the hood of the vehicle for the proper amount and type of refrigerant for the system). Then, let the system set for 2 minutes. Doing so will allow the refrigerant to carry the oil and spread more evenly throughout the system. ​​​​​​

13. Start the vehicle’s engine and turn on the A/C system.

    Make sure the windows and doors of the vehicle are open.



Should you have any questions regarding the installation of your new or remanufactured compressor, please do not hesitate to contact us.

 
 
Frequently Asked Questions
 
 

Q. Does the compressor come with oil?

A. Yes! This compressor comes pre-filled with the correct amount of oil. Thus, there is no need to add any additional oil to your system. 


Q. Does the compressor come with the clutch and pulley?

A. Yes, all of our compressors come complete with the clutch and pulley unless otherwise advertised.


Q. How long does shipping take?

A. Shipping usually takes anywhere from 1 to 5 business days. The amount of time it takes for the compressor to reach your destination depends on your location.


Q. Do you accept returns?

A. Yes, we accept returns within 14 days of purchase on all unused items. Any product you return must be in the same condition you received it and in the original packaging. A return authorization number (RMA #) is required from A/C Compressors prior to returning any merchandise. Your request to return these parts must be received by us within 14 days from the date of purchase. The purchaser is responsible for shipping charges to return all parts. Returned items that are found to have been installed, dirty, tampered with, locked up, or physically damaged will not be refundable.


Q. What is the return shipping address?

Online Seller RMA ,  41 logistics Blvd, Suite A-2  #44364006 ,  Walton  Kentucky  41094  US


NOTE: In order to determine if you are purchasing the correct part, please provide us with the year, make, model, and engine size of your vehicle. Failure to do so will result in the purchaser being responsible for any and all fees associated with returning the item for a refund. If the purchaser does not send us the year, make, model, and engine size and the purchaser receives a compressor which does not fit the purchaser's vehicle, the purchaser will be responsible for the shipping costs for the correct compressor, should the purchaser decide to purchase it. 
PushAuction