AC Compressor Clutch Coil Assembly Repair Kit Replacement for Honda CIVIC 1.8L 2006-2011

 
Compressor Type:
 
SANDEN TRSE07 TRSE09
 
Fitment : 2006 2007 2008 2009 2010 2011 HONDA CIVIC 1.8 LITER 

Cross Reference Part Number:  4918, 38800-RNA-A010M2, 38800-RNA-A011M2, 98555, 97555 4992, 38810RNAA02, 38810RRBA01, 3410, 4901, 4918, 4918U1, 80221SNAA01, 80221STKA41, 80221SVAA01, 80221SWAA02, 2004918, 4901, 4918, 3410, 4901, 4918U1 38810RNAA02, 38810RRBA01, 80101SFE003, 80351SDAA01, 80351SDCA01 
 
Manufacturer Part Number: 38810RRBA01, 38800-RNA-A010-M, 38800-RNB-A02, 38800RNAA010M2

Interchange Part Number: 38800-RNA-A01, 38810RNAA02, 38800RNAA011M2, 38800RNBA02, CO 4918AC  
 
 
Size:
 
1.Electromagnetic Coil Width:8.6cm
2.Clutch Plate Width:10.5cm
3.Pulley Assembly Width:10.6cm
4.Pulley Assembly Height:3.5cm
5.A/C Clutch Height:5.0cm
 
Kindly Note: Please allow slight dimension difference due to different manual measurement.
 
 
How to replace with new AC compressor Clutch  

1) Always wear goggles and start with the installation tool.  
2) Remove the clutch rotor using a puller.  
3) Remove the bearing from the clutch rotor.  
4) Measure the gap between the friction surfaces of the compressor clutch.  
5) Ohm check single-line AC compressor clutch coil, ground is supplied through the compressor main body.  
6) Two high pressure cut-off switches. If the system pressure is too high, the single function switch will interrupt the compressor function. The dual function switch first engages the high speed cooling fan in an attempt to reduce the pressure by increasing the heat transfer at the condenser. However, if the system pressure continues to rise after the fan is turned on, the switch will interrupt compressor operation.  
7) Hold the clutch hub with the appropriate tool while removing the bolt or nut.  
8) Use a puller to remove the clutch plate and hub.  
9) It is also recommended to search for relevant installation videos on the Internet. 
 
 
 
 
 
 
PushAuction