Underfloor Heating Loose Cable Kit - 150W Per Sqm
Our system consists of a 230V 150w per square metre cable which can be rolled out and to fit any shape room. Within the cable is a thin 2.0 mm heating cable. The cable should be laid directly under the surface to be heated, pressed down and then tiled over, you may wish to add self-leveling screed or cover it with a thin layer of tile adhesive to ensure that the surface is flat.
Cable spacing;
To achieve 100w output per sqm = 18cm
To achieve 150w output per sqm = 12cm
To achieve 200w output per sqm = 9cm
Use the table below to decide what length of cable you require
| Cable Length | Total Output | 100w per m2 | 150w per m2 | 200w per m2 |
| 11.1m | 200w | 2 m2 | 1.3 m2 | 1 m2 |
| 16.7m | 300w | 3m2 | 2 m2 | 1.5 m2 |
| 22.2m | 400w | 4 m2 | 2.6 m2 | 2 m2 |
| 27.8m | 500w | 5 m2 | 3.3 m2 | 2.5 m2 |
| 33.3m | 600w | 6 m2 | 4 m2 | 3 m2 |
| 38.9m | 700w | 7 m2 | 4.6 m2 | 3.5 m2 |
| 44.4m | 800w | 8 m2 | 5.3 m2 | 4 m2 |
| 50m | 900w | 9 m2 | 6 m2 | 4.5 m2 |
| 55.5m | 1000w | 10 m2 | 6.66 m2 | 5 m2 |
| 66.6m | 1200w | 12 m2 | 8 m2 | 6 m2 |
| 77.7m | 1400w | 14 m2 | 9.33 m2 | 7 m2 |
| 88.8m | 1600w | 16 m2 | 10.66 m2 | 8 m2 |
| 99.9m | 1800w | 18 m2 | 12 m2 | 9 m2 |
| 111m | 2000w | 20 m2 | 13.33 m2 | 10 m2 |
| 133.2m | 2400w | 24 m2 | 16 m2 | 12 m2 |
| 140m | 2500w | 25 m2 | 16.6 m2 | 12.5 m2 |
| 150m | 2700w | 27 m2 | 18 m2 | 13.5 m2 |
| 166.5m | 3000w | 300 m2 | 20 m2 | 15 m2 |
| 180m | 3240w | 32.4 m2 | 21.6 m2 | 16 m2 |
A choice of thermostats are also available, each has a temperature probe to fit under the floor to ensure your room is heated to just the right temperature.
Included in kit:
1. Selected cable length
2. Conduit pipe 2 metre
3. Tape x 1 roll (2cm*50m)
4. Installation manual
Included with thermostat:
1. Floor probe lead 2.5 metre
2. Installation manual
Technical Data
•Sizes available - 1.3, 1.8, 2, 2.6, 3.3, 4, 4.6, 5.3, 6, 6.6, 8, 9.33, 10.66, 12, 13.33, 16, 16.6, 18, 20, 21.6m²
• Output: 18W/m (-5% to +10%)
• Cable Diameter: 2.0mm
• Max. Ambient Temp: 30°C
• Min. Installation Temp: 5°C
• Rated Voltage: 230V
• Lead Wire Length: 2.5m
• Twin Conductor Heating Cable
• Conductor Insulation Fluoropolymer
• Outer insulation Fluoropolymer
• 50 Year Warranty
Used for:
Heating cable is ideal for Bathrooms, Kitchens, Lounges, Dining rooms and any other areas.
Key Features:
Heating cables utilises modern materials and installation techniques:
• Dual core heating cable technology allows single point connection
• Full earth screen providing electrical safety and peace of mind
• Emits Zero EMF (electromagnetic fields)
• Attached 2.5M connection lead allows connection from one end
• Easily installed on a sound sub floor such as concrete, tile backer boards and marine grade plywood
• Approved to EN60335-2-96 as required by the 17th Edition wiring Regulations, CE Certification and RoHS Compliant
• 50 Year Manufacturer's guarantee against manufacturing defects • Heat output 18W/m for primary heating or floor warming applications
• Low build height • Easy installation
• Suitable for wet areas
• Single point connection
• Durable construction Why buy me:
• CE certified to meet with all the EU and UK standards.
We offer FREE NEXT WORKING DAY shipping on all orders to mainland UK. (This excludes Northern Ireland, Channel Islands and Scottish Highlands, although delivery is possible. Please contact us for a price).
To qualify for next working day delivery service, orders must be placed by 1pm Monday to Friday.
Some products depending on the order quantity, require palletised delivery and therefore are subject to 2/3 days delivery timescale. We have stated this on the product listings individually.
We accept card payments via Paypal.
Please pay as soon as possible after confirming your order to enable us to post your goods as soon as possible.
Customer Satisfaction
If you are not 100% satisfied with your purchase, you can return the product within 30 days and get a full refund, or exchange the product. Items must be sent along with the printed order information. Any returns must be in the original packaging.
We must be notified of any damages, defects or shortages within 14 days of receiving your goods.
Underfloor Heating Loose Cable Kit - 150W Per Sqm
Our system consists of a 230V 150w per square metre cable which can be rolled out and to fit any shape room. Within the cable is a thin 2.0 mm heating cable. The cable should be laid directly under the surface to be heated, pressed down and then tiled over, you may wish to add self-leveling screed or cover it with a thin layer of tile adhesive to ensure that the surface is flat.
Cable spacing;
To achieve 100w output per sqm = 18cm
To achieve 150w output per sqm = 12cm
To achieve 200w output per sqm = 9cm
Use the table below to decide what length of cable you require
| Cable Length | Total Output | 100w per m2 | 150w per m2 | 200w per m2 |
| 11.1m | 200w | 2 m2 | 1.3 m2 | 1 m2 |
| 16.7m | 300w | 3m2 | 2 m2 | 1.5 m2 |
| 22.2m | 400w | 4 m2 | 2.6 m2 | 2 m2 |
| 27.8m | 500w | 5 m2 | 3.3 m2 | 2.5 m2 |
| 33.3m | 600w | 6 m2 | 4 m2 | 3 m2 |
| 38.9m | 700w | 7 m2 | 4.6 m2 | 3.5 m2 |
| 44.4m | 800w | 8 m2 | 5.3 m2 | 4 m2 |
| 50m | 900w | 9 m2 | 6 m2 | 4.5 m2 |
| 55.5m | 1000w | 10 m2 | 6.66 m2 | 5 m2 |
| 66.6m | 1200w | 12 m2 | 8 m2 | 6 m2 |
| 77.7m | 1400w | 14 m2 | 9.33 m2 | 7 m2 |
| 88.8m | 1600w | 16 m2 | 10.66 m2 | 8 m2 |
| 99.9m | 1800w | 18 m2 | 12 m2 | 9 m2 |
| 111m | 2000w | 20 m2 | 13.33 m2 | 10 m2 |
| 133.2m | 2400w | 24 m2 | 16 m2 | 12 m2 |
| 140m | 2500w | 25 m2 | 16.6 m2 | 12.5 m2 |
| 150m | 2700w | 27 m2 | 18 m2 | 13.5 m2 |
| 166.5m | 3000w | 300 m2 | 20 m2 | 15 m2 |
| 180m | 3240w | 32.4 m2 | 21.6 m2 | 16 m2 |
A choice of thermostats are also available, each has a temperature probe to fit under the floor to ensure your room is heated to just the right temperature.
Included in kit:
1. Selected cable length
2. Conduit pipe 2 metre
3. Tape x 1 roll (2cm*50m)
4. Installation manual
Included with thermostat:
1. Floor probe lead 2.5 metre
2. Installation manual
Technical Data
•Sizes available - 1.3, 1.8, 2, 2.6, 3.3, 4, 4.6, 5.3, 6, 6.6, 8, 9.33, 10.66, 12, 13.33, 16, 16.6, 18, 20, 21.6m²
• Output: 18W/m (-5% to +10%)
• Cable Diameter: 2.0mm
• Max. Ambient Temp: 30°C
• Min. Installation Temp: 5°C
• Rated Voltage: 230V
• Lead Wire Length: 2.5m
• Twin Conductor Heating Cable
• Conductor Insulation Fluoropolymer
• Outer insulation Fluoropolymer
• 50 Year Warranty
Used for:
Heating cable is ideal for Bathrooms, Kitchens, Lounges, Dining rooms and any other areas.
Key Features:
Heating cables utilises modern materials and installation techniques:
• Dual core heating cable technology allows single point connection
• Full earth screen providing electrical safety and peace of mind
• Emits Zero EMF (electromagnetic fields)
• Attached 2.5M connection lead allows connection from one end
• Easily installed on a sound sub floor such as concrete, tile backer boards and marine grade plywood
• Approved to EN60335-2-96 as required by the 17th Edition wiring Regulations, CE Certification and RoHS Compliant
• 50 Year Manufacturer's guarantee against manufacturing defects • Heat output 18W/m for primary heating or floor warming applications
• Low build height • Easy installation
• Suitable for wet areas
• Single point connection
• Durable construction Why buy me:
• CE certified to meet with all the EU and UK standards.
We now have a warehouse in Bermondsey, London SE16, where we have many of our products in stock.
All you have to do, is place your order via eBay, send us a message that you would like to collect the goods, and we will have it ready within an hour for you to pick up.
Our full address is;
Underfloor Heating Express,
Unit 19 Enterprise Industrial Estate, Bolina Road,
London, SE16 3LF
We are situated outside the Congestion and ULEZ charges
We offer FREE NEXT WORKING DAY shipping on all orders to mainland UK. (This excludes Northern Ireland, Channel Islands and Scottish Highlands, although delivery is possible. Please contact us for a price).
To qualify for next working day delivery service, orders must be placed by 1pm Monday to Friday.
Some products depending on the order quantity, require palletised delivery and therefore are subject to 2/3 days delivery timescale. We have stated this on the product listings individually.
We accept card payments via Paypal.
Please pay as soon as possible after confirming your order to enable us to post your goods as soon as possible.
Customer Satisfaction
If you are not 100% satisfied with your purchase, you can return the product within 30 days and get a full refund, or exchange the product. Items must be sent along with the printed order information. Any returns must be in the original packaging.
We must be notified of any damages, defects or shortages within 14 days of receiving your goods.