CHOICE OF MECHANICAL ROOM THERMOSTAT


TEAM CONTROLS Mechanical Room Thermostat


The mechanical room thermostat is an economical and simple to use room thermostat. Simply turn the mechanical control dial to your desired temperature to control your room temperature. This unit also produces an audible “click” when you turn the dial past the current temperature so you know when the system is being turned ON or OFF. The mechanical two wire thermostat is very easy to install And, by having volt free contacts, is suitable for systems with either a combination or normal boiler. If you have a three wire installation, simply cut back and make safe the neutral, and this two wire thermostat will give you years of faithful service.


or


HONEYWELL
 
T6360B1028 Room Thermostat

The T6360 is a mains voltage Room Thermostat designed to give automatic temperature control of domestic wet central heating systems. It can be used to directly switch a circulating pump or boiler, or to operate spring return and motor open/motor close zone valves.

The T6360 can switch electrical heating loads up to 10A. The T6360 thermostat can also be used for cooling applications.


Features

  • Dual diaphragm temperature sensing element
  • Suitable for surface or switch box mounting
  • Heat anticipator for close temperature control
  • 10 to 30C setpoint range
  • Change-over contact switching (cooling loads)
  • Double insulated


or

Teams Electronic Room Thermostat

The room thermostat is economical and simple to use. Simply turn the control dial to the desired temperature to control the room temperature. Includes a battery powered LCD display which displays the current room temperature. When the temperature is adjusted, the LCD display will briefly display the revised temperature before returning to the current room temperature.

Large Clear Adjustable Dial

TPI Technology

Double insulated

Surface mounted

Temperature control accuracy of +/- 0.6ºC

Standard industry black plate

Easy to use and quick to install



HONEYWELL
 
DT90E Wired Digital Thermostat
 

The DT90E digital room thermostat has been designed to provide automatic temperature control of gas or oil fired boiler systems, underfloor heating, electric heating and zoning systems. Energy efficiency is addressed by state of the art control performance qualifying it as a Load Compensator.

The DT90E has an ECO button energy saving feature which gives timed setback or boosts temperatures to reduce energy demand. This is a TPI (Time Proportional Integral) control product as defined in the Building Regulations, which make boilers operate more efficiently and provide close accurate control. The 'OFF' setting can be used for frost or hypothermia protection, assuming the system time control is also switched on.

'Installer Mode' allows control to be matched to the system and user requirements, adapting minimum on or off times, set point controls etc. Two wire, volt free connections are ideal for use with combination boilers or heating zones.

 

   Features

  • Energy saving TPI control
  • ECO button for energy saving mode
  • Simple user operation
  • 5 to 35°C set point range
  • 'OFF' setting with adjustable OFF setpoint
  • Direct replacement of the DT200 digital thermostat
  • Mains or low voltage switching
  • Two wire connection
  • Energy saving TPI control (see FAQ TPI Control)

STAY WARM AND TAKE YOUR PICK

TEAMS DIGITAL ROOM THERMOSTAT HAS BEEN PRICED TO CLEAR NORMAL SELLING PRICE IS £25


++PLEASE NOTE HEATING CONTROLS SHOULD ONLY BE INSTALLED BY QUALIFIED ELECTRICIANS / PLUMBERS - WE CAN NOT ADVISE ON HOW TO WIRE THEM++