Furman Merit Series M-10x E Power Conditioner - 10xE - BNIB - Belfield Music

Furman Merit Series M-10x E Power Conditioner - 10xE - BNIB - Belfield Music

Product Information:

A Merit Series Power Conditioner is the perfect low-cost AC power solution for any rack mount system. Install an M-10x E in to the top slot of your rack, and the ten switched outlets in the rear panel will power up and protect all your equipment up to a 10-amp load.
INSTRUMENT RIGS
You've got a rack for your effects, preamps, tuner...You're going to plug that into the wall? One big spike and your rig is up in smoke. Furman's standard level surge/spike protection defends your gear from the spikes and surges that are so common at gigs and practice spots. With Furman's standard level RFI/EMI filtration, you'll get a quieter tone without pops, crackles, and the local radio station coming out of your amp. Plus, dual pull-out lamps (M-10Lx E) let you see your rack without turning the house lights on.
RECORDING
Can't track down where that noise is coming from? Your mix sounding flat? With Furman's standard level RFI/EMI filtration you'll lower the noise floor causéd by the dirty AC power coming into your console or DAW. Furman's standard level surge and spike protection keeps your sensitive digital equipment from acting funny or burning up due to everyday spikes and surges. With a 10A capacity and eleven total outlets, it's enough to power your whole home studio.
DJ EQUIPMENT
Bars, clubs and other event venues have some of the worst power out there - from air compressors turning on and off to light shows pulling current loads up and down, the AC power can be a strain on the circuits in your rig. Furman's standard level protection and filtration keeps the bad stuff out.
PRO AUDIO
When you're out there gigging, you never know what kind of power you're going to get. The wear and tear on mobile rigs eventually takes it toll - that's why it's smart to plug into Furman's standard level protection and RFI/EMI filtration. It keeps your equipment safe and sounding clean. Whether you're setting up a show at the local club or powering up the church band for their next service, make sure you give them power they can trust.

Specifications:

Maximum Output Current: 10 amps
Line Cord: 1.5 meter, removable, IEC C-13 female to Schuko male
Operating Voltage: 230VAC 50Hz
Spike Protection Mode: Line to neutral
Energy Dissipation: 305 joules
Peak Impulse Current: 12,000 amps
Maximum Continuous Operating Voltage: 650 Volts
Noise Attenuation: Transverse mode: Greater than 20dB, 1.5Mhz to 200 Mhz
Dimensions: 1.75” H x 19” W x 7.5” D
Weight: 2.3 kg.
Safety Agency Listing: CE
Warranty: Merit Series units are protected by a limited three year warranty covering defects in materials and workmanship.

Postage info

Additional delivery notes

Click the Postage tab above the listing description for all postage info. If we can't dispatch your item via your selected option, for whatever restriction, we will then dispatch with the nearest replacement carrier.

PICK UP OPTION

Our items are available for pick-up. Pick up procedure is as follows:

1. Purchase the item through eBay
2. Email us to coordinate pickup from our Bass Hill store

PAYING VIA PAYPAL

We accept PayPal on our all our items so you can shop with confidence.

Simple choose the PayPal option when proceeding through the checkout.

Additional Information

At Belfield Music we try to answer every query we receive as quick as possible. With email sent after hours EST and weekends we will do our best to ensure these are answered the next business day. We appreciate your understanding and patience in this matter.

Ask seller a question

You might also like

Ernie Ball 2002 Acoustic Guitar Strings Earthwood 80/20 BRONZE Medium 13-56

Ernie Ball 2003 Acoustic Guitar Strings Earthwood 80/20 BRONZE MediumLight 12-54

Ernie Ball 2004 Acoustic Guitar Strings Earthwood 80/20 BRONZE Light 11-52

Ernie Ball 2006 Acoustic Guitar Strings Earthwood 80/20 BRONZE Extra Light 10-50