Greensand
plus media 1/2 cu. ft.
Ask for pricing by the bulk
v Removes Iron, Manganese, Hydrogen Sulfide, Arsenic and Radium
and Sulfur.
v Performance Media for Water Filtration
v GreensandPlus is a black, granular filter medium used in
pressure-type filtration systems.
Hydrogen Sulfide
Removal
GreensandPlus
directly oxidizes sulfide and catalyzes the oxidation reaction. Increased run
length and service life of GreensandPlus may be realized by pre-feeding a
solution of chlorine-containing compounds.
Regeneration with
chlorine should be initiated before the complete exhaustion and sulfide is
detected in the treated water to prevent damage to the media.
Arsenic Removal
GreensandPlus can be
used to remove arsenic from ground water in the presence of iron. Chlorine must
be pre-injected to oxidize the iron and convert arsenite to arsenate and keep
the media regenerated.
Arsenic combines
with oxidized iron and is filtered out in the media. If there is not a
sufficient amount of iron present in the raw water, then an iron salt such as
ferric chloride can be pre-injected.
A general guideline
is 1 mg/L of iron to remove 20 µg/L of arsenic. This can vary greatly depending
on pH, silica, and other competing ions in the water.
Radium Removal
GreensandPlus can be
used to remove radium from ground water in the presence of manganese, in a
similar manner to arsenic removal. In the case of radium, manganese in the raw
water is necessary.
If there is not a
sufficient amount of manganese present, then manganese sources, such as
manganous sulfate can be pre-injected.