https://cdn.ecommercedns.uk/files/9/249859/7/35692847/ebayheader1.png
https://cdn.ecommercedns.uk/files/9/249859/2/35693522/description.png

This Buy It Now listing is for a BRAND NEW Cartridge-to-Turbine-Housing Clamp.

This clamp is used to clamp up the V band style flanges of the bearing housing and the turbine housing flanges of the TD05 & TD06 & RHF5 Turbochargers (as well as others) as used on many vehicles especially the Subaru TD05 units.

SPECIFICATIONS:
OUTSIDE DIAMETER 90.8MM
ASSEMBLED SIZE (FLANGE SIZE) 87.6MM
FLANGE CLAMPING THICKNESS 13.4MM

MAXIMUM TORQUE SETTING 5NM (NEWTON METRES)


These clamps are complete and include fixing bolt and nut.
Parts are zinc coated to prevent rust.

CORRECT TIGHTENING OF YOUR V BAND CLAMP

Correct fitting of a V band clamp is vital for correct operation and to ensure you do not suffer premature failure.

 V Band clamps are NOT tightened excessively.  They are designed to pinch the mating flanges together whilst allowing movement through expansion and vibration.  Over tightening can damage clamps, flanges and in worst case pipe work. 

To mount your V Band clamp, butt mating flanges together and fit clamp.  Tighten clamp to a torque setting of 3.5 Newton Metres (NM)  Then using a rubber mallet, tap around the mating flanges to allow the joints to fully centre and sit without any unequal load. Then increase torque to its final torque setting of 5 Newton Metres (NM).

Further tapping with a rubber mallet to removing any uneven load from the clamp or flange is beneficial  whilst checking the torque setting stays at its rating of 5 Newton Metres (NM).

Precision made and in stock in our UK workshop ready for same day dispatch (if ordered before 12pm).


https://cdn.ecommercedns.uk/files/9/249859/4/35693414/aboutus.png

You are purchasing this product from Turbo Rebuild Ltd.

Turbo Rebuild is a UK family run business based in Lancashire. We are professional Turbocharger Reconditioners and work from our fully equipped, purpose built workshop which houses all required machinery for the testing, repair and production of Turbochargers and Turbo parts.
We have been trading in the Turbocharger market since 1998 and are fully VAT registered. We pride ourselves on the quality of the products we sell and the service we offer as our feedback shows.



IMPORTANT INFORMATION FOR INTERNATIONAL CUSTOMERS

Ebay only collect VAT and duties for orders up to 150 EUR.

Any order total over 150 EUR does NOT include VAT, Import duties, or any brokerage charges that may be applicable in your receiving country.

Please note it is the BUYERS responsibility to pay any import duties, taxes and brokerage charges upon entry to the receiving country.  Failure to pay duties when requested will result in deductions from any refund issued by ourselves.