















| S100 S300 S3000 Comparison Chart | |||
| Packing list | ![]() |
![]() |
![]() |
| Product | S100 | S300 | S3000 |
| Gas supply mode | External air source | Built-in air pump | Built-in air pump |
| Outlet pressure | 0.5 Psi | 0.8-14.5 Psi | 0.8-14.5 Psi |
| Pressure gauge | × | × | √ |
| Flow meter | × | √ | √ |
| Flow control | √ | √ | √ |
| Power display | √ | √ | √ |
| Work indicator lamp | × | √ | √ |
| Work mode | Mode 1 | Mode 2 | Mode 3 |
| Safety measures: Antispontaneous combustion |
√ | √ | √ |
| Safety measures: Prevent overheating |
√ | √ | √ |
| Printed circuit board | × | × | √ |
| ANCEL S100 |
|
๐ DESIGNED FOR EVAP TESTING : Open the plastic cover of the EVAP service port, then use the spool wrench to remove the check valve clockwise, then install the EVAP service port adapter, and introduce smoke from the port into the EVAP leak detection system.
๐ FAST SMOKE OUTPUT : The smoke can be produced within 8 seconds, and with stable and large amount of smoke output after switch-on(baby oil or mineral oil). Dramatically reducing diagnostic time. ๐ NO AIR PUMP : Connect shop air supply, connect 12V vehicle power, introduce shop air to the ANCEL S100 smoke machine leak detector, turn the Flow Dial to open the air flow, switch on the power at the back of the unit, then ANCEL S100 smoke machine automotive will start to generate smoke. ๐ WIDE TESTING RANGE : ANCEL S100 car smoke machine can do smoke testing of multiple systems, such as EVAP systems, Intake Systems, Cooling / EGR /Exhaust Systems, Crankcase Systems, Engine Airtightness, Vacuum Leaks, Low Pressure Turbo leaks. Applicable cars, motorcycles, snowmobiles, off-road vehicles, ATVs, light trucks and speedboats boats. ๐ฅ SAFE AND ADVANCED : The ANCEL S100 evap smoke machine is safe and reliable without starting the vehicle during use. The smoke is healthy and harmless. In addition, when the temperature limit of 75 ° C is exceeded, the intelligent power will be turned off automatically. ![]() ![]() ![]() |
| ANCEL S300 |
|
๐VERSATILE LEAK TESTING : Our smoke leak detector is designed to handle a variety of leak testing scenarios, from EVAP systems to vacuum pipes and more. This versatility ensures that mechanics and technicians can use it to fully diagnose a variety of vehicle systems, saving time and effort compared to using other smoke tester. This makes it a versatile and cost-effective solution for any workshop or garage.
๐COMPLETE ACCESSORIES :The ANCEL S300 automotive smoke machine comes with a full set of accessories needed for a variety of testing scenarios. These include the adapter cone, Intake Bladder, EVAP adapter, 23Pcs block-cap set and more, ensuring that users have everything they need right out of the box. There is no need to purchase additional accessories separately, saving both time and money.
๐BUILT-IN AIR PUMP : With an integrated air pump, our smoke machine operate independently of an external shop air source. This feature not only improves portability and eliminates the inconvenience of setting up additional equipment, but also simplifies the testing process and reduces shop equipment clutter. Mechanics can begin testing immediately out of the box, increasing workflow efficiency. ๐SAFETY-FRIENDLY DESIGN:Smoke tester is equipped with intelligent overheat protection, which automatically shuts off if it detects overheating (over 239โ). In a busy workshop environment, this feature not only protects the equipment, but also effectively extends the product's lifespan
๐ACCURATE INSPECTION & PRESSURE DECAY TESTING :The tester is capable of performing pressure decay tests with extreme accuracy, pinpointing even the smallest leaks in vehicle systems. This feature takes the guesswork out of diagnostics to a minimum, resulting in faster, more reliable detection, optimized repair efficiency and reduced downtime. ๐CABIN AIR LEAKAGE DETECTION : Poor cabin sealing can lead to unstable vehicle operation, increase fuel consumption and noise, and reduce air-conditioning efficiency, etc. The ANCEL S300 can produce dense columnar smoke to complete cabin leakage detection in windless environments, which helps to complete vehicle maintenance.
๐งEASY TO OPERATE : 1, add mineral oil, 2, connect the 12V DC power supply, 3, connect the smoke hose, 4, turn on the switch, the smoke leak detector will produce dense smoke within 10S. Don't miss it - order this automotive smoke machine today and start inspecting your vehicle right away (โmineral oil is not included)
โWARNING TIPS: Note that an external pressure regulator is required when using the S300 Auto Smoke Machine Leak Detector for EVAP Leak Test. ![]() ![]() ![]() ![]() |
| ANCEL S3000 |
|
๐SMOKE MACHINE LEAK DETECTOR : S3000 Automotive smoke machine can easily check older vehicles, throttle shafts, engine block, turbo test system, crankcase system, intake system, exhaust system, fuel tank system, EVAP system, EGR system, cooling system, various pipe fittings leakage problems.
๐HIGH PERFORMANCE, PREMIUM BUILD :No need for a separate air supply! Not only has a built-in air pump, but also has a pressure gauge and an adjustable flow meter. The compressor generates air pressure from 0.8 to 14.5 psi, allowing smoke to be easily introduced into the tested sealing system, speeding up the leak detection process. ๐NO DAMAGE TO YOUR CAR :Powered by an on-board battery, heating baby oil or mineral oil produces non-toxic fumes that will not cause harm to the human body. S3000 car smoke machine has a smart protector, which will automatically turn off the power in extreme temperatures to ensure the safety of the operator and equipment. ๐EASY TO USE SMOKE MACHINE : The ANCEL S3000 smoke machine can help you detect leaks in your vehicle systems in just a few simple steps.(1) Add tobacco oil (USP mineral oil/baby oil), you need to buy it separately. (2) Check the power cord (12V DC car battery). (3) Connect the system and test for leaks.The automotive smoke machine has a hook to hang on the hood of your vehicle for easy leak diagnosis. Note: No oil is included in the package, but there is an oil delivery funnel. ๐ฅADJUSTABLE AIR FLOW METER & PRESSURE GAUGE :ANCEL S3000 automotive smoke machine leak detector equipped with a pressure gauge to help you observe the change of the gauge value and easily find small leaks. Meanwhile the adjustable flow meter can help you easily control the amount of smoke. With a built-in air pump and smoke generator, the smoke machine leak detector does not rely on additional air pumps, making it a great choice for vehicle maintenance.
๐NOTE FOR LOW-PRESSURE TESTING :ANCEL S3000 smoke tester machine is a high-pressure automotive smoke machine leak detector. Test low-pressure systems like EVAP, an extra low-pressure regulator is required. ๐WIDE RANGE OF APPLICATIONS : ANCEL S3000 smoke machine produces plenty of smoke in 30 seconds, which can help you quickly, easily, and confidently pinpoint the location of a leak. S3000 is used to detect leaks in piping systems in automobiles, motorcycles, snowmobiles, ATVs, light trucks and speed boats, suitable for all models(12V vehicle battery).
๐จDETECT CABIN AIR LEAKS : Air leaks in the cabin can create unpleasant odors, increase wind noise, reduce air conditioning efficiency, and even pose a safety hazard. The ANCEL S3000 Smoke Machine Leak Detector produces columns of smoke in a windless environment to locate leaks in the cabin so that they can be repaired in a timely manner, improving safety on the road.
![]() ![]() ![]() ![]() ![]() ![]() |
| Brand | ANCEL |
|---|---|
| Manufacturer Part Number | ANCEL S100 S300 S3000 EVAP Smoke Machine |
| Product type | EVAP smoke machine |
| Vehicle type | Motorcycle / Vehicle |
| Supported system 1 | Intake System Test, Car Sealing Test, |
| Supported system 2 | Fuel Tank System Test, Exhaust System Test, |
| Supported system 3 | Various Pipe Fittings Test. |
| Function 1 | EVAP System Test,Vacuum Leaks Test |
| Function 2 | Intake System Test,Exhaust Systems Test |
| Function 3 | Fuel Tank System Test,Turbo Test |
| Function 4 | Cooling System,EGR System,Crankcase System |
| Work mode 1 | Air mode |
| Work mode 2 | Smoke mode |
| Safety measures 1 | Anti-combustion |
| Safety measures 2 | Prevent overheating |
| Test liquid | Baby oil (no included) |
| Working temperature | -20โ~75โ |
| Outlet pressure (s100) | 0.5 Psi |
| Outlet pressure (s300) | 0.8-14.5 Psi |
| Outlet pressure (s3000) | 0.8-14.5 Psi |
