1.Control system: air control (Works with air compressor)

2.Air pressure for handpiece: 0.01Mpa ~ 0.4Mpa

3.Air pressure inlet: 4-8kg

4.Air pressure outlet: 0-4kg

5.Water pressure : 0.1Mpa ~ 0.25Mpa

6.Water pressure Inlet: 2kg

7.Water pressure outlet: 0-2kg

How to use:

1. Connect the gas source with the quick head and connect the water source to the filter.

2. According to the different requirements of the use of different external accessories.

3. Turn on the water vapor switch.

4. Foot switch, adjust the panel water supply, air adjustment knob, according to use requirements.

5. Turn off the water source and air source after work, prevent the gas pressure from bursting the water pipe too high.

6. After the control valve has been adjusted according to the 4kg system, the user does not need to adjust the valve, if he needs to use instruments larger than 3kg, according to the need for adjustment.

Note:

1. Do not drop the tube of the Turbine Unit on the ground, as you will not be able to connect it to the handpiece.

2. To avoid the problem of loose speed control and maintain long service life of this machine, please turn the speed to "min" with the speed controller before starting the following operation: press the "on" or "off" button , changing the cutter between clockwise and reverse or changing the control between manual and pedal.

Notice

This item may be intended for use by professional health care providers only.

The seller may ask you to provide evidence that you are a qualified health care provider and are entitled to buy and

use certain items in your country.