5PCs ETERFANT Dental X-Ray XCP-DS Fit Anterior/Bite wing/Posterior/Endodontic US
Positioning System For Film and Phosphor Plates.
Directions for use:
1. Assemble instrument. Be sure the biteblock is centered in aiming ring.
2. Place appropriate size film in instrument with imprinted side of film away from x-ray tubehead.
(1)“White toward light” — place plain or white side of film toward x-ray
tubehead.
(2)
Do not bend back the bite block when inserting the film.
3. Position instrument in patient’s mouth as posterior as possible, away from the teeth and in the mid-palatinal or mid-tongual area. Center film on the teeth to be radiographed
(1)
“Lean and tip” — lean the chair back just a little and/or tip the patient’s chin up to facilitate placement of the instrument into the center of the patient’s mouth. For exposure, the occlusal surface should be parallel to the ground.
(2) For bitewing exposures, the patient should be biting on the same arch as the teeth being radiographed. When assembled correctly, the bitewing instrument should hold the film with the plain side facing the bite-block’s bite surface and the x-ray tubehead.
(3)
For endo, place the instrument over the tooth, files and clamps, resting on the adjacent teeth. If using a rubber dam, release the top or bottom of the dam from the frame. The dam and frame do not need to be removed.
4. Instruct patient to close slowly and bite. A cotton roll can be placed between the bite-block and the opposite teeth for added comfort and stability.
(1)
“Gentle; breathe” — ask the patient to gently bite down and then take several breaths; it gives them something to concentrate on other than the radiograph procedure,
5. Position tubehead parallel to indicator arm and centered on aiming ring.
6. Make exposure.
///////////////////////////////////////////////////
High-Precision Support Arm: Designed for precise positioning, enhancing X-ray shooting efficiency and accuracy.
Color-Coded Technology: Rinn XCP-ORA type simplifies installation processes, ensuring quick positioning every time.
Multi-Functional Compatibility: Suitable for various X-ray alignment systems, meeting diverse medical needs.
Reduced Component Complexity: Single support arm minimizes the number of required components, simplifying operational procedures.
Intended Use:
Specifically suitable for dental clinics, hospital dentistry departments, and other settings as a key auxiliary tool for X-ray shooting, helping doctors easily achieve high-quality intraoral X-ray photography.
Indications for Use:
XCP-ORA® and XCP® are indicated for use in positioning film for intraoral radiographs.
Instructions for Use:
1. Insert XCP-ORA positioning arm into the appropriate color-coded channel of the aiming ring.
NOTE: The anterior and posterior biteblocks both connect to the same positioning arm pins.
2. Attach Rinn XCP biteblock.
3. When correctly assembled, the imaging area should appear centered when viewed through the aiming ring.
4. Position the holder in the patient's mouth. Slide the ring close to the patient's face, align the x-ray tube, and take the exposure.
NOTE: Place the holder in the center of the patient's mouth for added comfort.
5. After taking the radiograph, adjust the holder to the next desired position.
6. When finished, disassemble the XCP-ORA arm and ring for steam autoclaving.
Package Contents:
-1 x XCP Alignment Arm
- 1 x User Instruction Manual
Notes:
- Please read the user manual carefully before use to ensure correct installation and operation.
- Regularly clean and sterilize the support arm and components to maintain hygiene.
FDA Statement:
The sale of this item may be subject to regulation by the U.S. Food
and Drug Administration and state and local regulatory agencies.
So you can bid it on this item only if you are an authorized purchaser.
If the item is subject to FDA regulation,We have to verify your status
as an authorized purchaser of this item before shipping of the item.
Thanks for your understanding!
