3-in-1 Solder Smoke Absorber Fume Extractor Fan with 2 Metal Arms and 3 Carbon Filters, 10 Brightness 3 Light Colors LED Lamp, 3-hole Tabletop Clamp, for ESD DIY Working Soldering Desoldering Rework Station

High-quality Fume Extractor
Low noise, moderate fan airflow, efficient work.3300L/min maximum air flow absorb away the harmfulsmoke, protect your healthy.

Bright LED Lamp
LED lights with 3 colors to change and 10 brightness levels can be adjusted according to the working conditions, is an ideal tool for welding work

Actived Carbon Filter
The Carbon filter before exhaust fan, have a strong absorption of toxic solder fumes, and 3pcs spare filter sponge can be replaced

2Pcs Helping Hands
2Pcs flexible helping hands, universal joint pipe, easily positioned where you want them. Eliminates the frustration of traditional helping hands. (Note: Alligator clips are mainly used to hold small and light objects such as PCBs, and cannot bear heavier objects.)

Specifications:
Power Supply: 12V 1A (encluded adapter)
Power Consumption: 10W
Maximum Air Flow: 3300L/min
Inlet Concentration: 2(mg/L)
Fans Diameter: 90mm / 3.54in
Lamp Head Diameter: 120mm / 4.7in
LED Beads: 48 SMD Led lights
Rocker Arm Length: 225*225mm / 8.85*8.85in
Metal Arm Length: 195mm / 7.7in
Alligator Clip Length: 55mm / 2.1in
3-hole Desk Clamp Length: 70mm / 2.7in
Small Arm Clip Length: 50mm / 1.9in
Main Material: Aluminum alloy + metal

Package including:
1 x Lighted Smoke Absorber
1 x 3-hole Desk Clamp
1 x Plug Adaptor
2 x Helping Arms with Alligator Clips
3 x Carbon Filters
Solder Smoke Absorber/Fume Remover/Smoke Extractor: The smoke from soldering is toxic during soldering, is harmful to your health. Our 3in1 soldering smoke absorber/fume remover/smoke extractor prevention absorber DIY working fan(with Carbon Filter LED Daylight)protect you away from poisonous smoke. Angle flexibility amply meets the various situations, can precisely cover the smoke diffusing area
Low Noise Fan with Smoke Filter: ESD safe smoke Extractor fan can extract away the solder, flux, chemicals, gases or other hazardous substances in the solder smoke, and purified by the activated carbon filter net. Extra 3 easily replaceable filters give you good and timely smoke prevention filter supplements. Recommended filter net replacement every 4 to 5 months depending on usage
Multifunctional LED Lamp: At the time of smoke absorbed fan working, its 3 Light Colors (3000K-4500K-6000K) and 10 Brightness Levels can help you work in various light conditions. Natural light illumination, soft and without ghost, glare, protect eyes. You can adjust and use according to your needs. Note: The overall brightness will be soft as we use eye-friendly LED beads
2Pcs Flexible Universal Arms: The alligator clips of helping hands comes with a rubber protective cap, protect the PCB from short or avoid item damaged because of the sharp clip jaw. You can perform maintenance/welding etc. items with two helping arms, and at the same time to use solder smoke absorber can improve your work efficiency better. (Note: Alligator clips are mainly used to hold small and light objects such as PCBs, and cannot bear heavier objects.)
Adjustable Arms: The lamp head can be put 220 degrees up and down, and 360 degrees swivel. 8.85 inches and 8.85 inches extendable long arm and expanded up to 17 inches. And equipped 3 fixed knobs and 2 pair fixed springs help you adjust the lamp position smoothly without swaying left or right, neither sharp falling nor shaking
Kindly Note: To ensure the best smoke absorbing, please make the fan and solder joint within 10inches(25cm). (Please refer to the product video content for the best use distance and use direction.)