Easy wood turning on your lathe with VINWOX Turning tool set, plus Titanium Coated Carbide Blade for extended 2X service life. Perfect tools for beginners, schools, small projects and professional turners. Carbide cutter always in right angle and desirable turning result. When the tool dulls, simply rotate the tip for a fresh, clean cutting edge. ✅Ergonomics design Handle and Easy to use ✅Overall Length: Approximately 20" ✅Handle Length: Approximately 13-1/2" ✅Tool Shank: Approximately 6-1/2" ✅Carbide Rougher: 11.3x11.1x1.75mm (2-sided Square & 2-sided 2" Radius) Carbide Tip *Basic square cutter for heavy cuts, outside curves, cut tenons, rough turning or when you need a dead square inside corner. *2” Arc Square Radius Carbide Tip Used for finishing and inside bowls, especially bowls under 8” diameter, also great for pen making on last few passes on finishing. ✅Carbide Finisher: 12mm Diameter Round Shape Carbide Tip For general shaping, light finishing cuts, perfect for inside curves and spindle coves, also works well for hollowing bowls. ✅Carbide Detailer: 28x10mm Diamond Shape Carbide Tip For final touches such as small beads and coves, also good for roughing, finishing and cutting chuck tenons. ✅Advantages on Titanium Coated Carbide Blade: --Increased hardness: The titanium coating is usually harder than the carbide substrate, which helps to improve the wear resistance of the tool. --Anti-oxidation and corrosion resistance: Titanium has good anti-oxidation and corrosion resistance, which can reduce the wear of the tool caused by high temperature and chip corrosion during the cutting process. --Reduced friction: The titanium coating can reduce the friction coefficient between the tool and the workpiece, thereby reducing cutting forces, improving cutting efficiency, and extending tool life