The tire pressure sensor on models in and after 2012 can be read, only with some specified diagnostic tools.
Before tire pressure monitoring system works normally properly, the body control module will record ID
information of each position in the tire pressure sensor; and use the following methods to read the tire pressure sensor.
After replacing a tire or wheel speed sensor.
Please refer to the specific methods as follows:
Step 1 - Enter leaning mode
>Set the gearshift lever to P
>Put the ignition switch to ON
>Enter the interface of tire pressure display by DIC
>DIC shows Press Set / Ctrl to re-learn
>Press Set / Ctrl
>The turn signal is lighted for 3 seconds and the horn beep sound twice to enter the learning mode
Step 2 - Read tire pressure sensor information
>Start from the front-left wheel
>Make the Diagnostic Tool antenna up against the valve core position & close to the rim of the tire sidewall
>This tire pressure tool starts by the start switch
>Successful to read the tire pressure sensor information when the horn bleeps once
Step 3 - Same method to read other tirepressure information
>Follow the instruction above to read tire pussure of the front-right, rear-right, rear-left wheels
>Turn signals is lighted for 3 seconds and the horn bleeps twice when the learning is complete
The battery should be at least 400mAh, otherwise it might not work properly. After using that battery and pressing and holding the tx button for approximately 8 to 10 seconds on each tire, the transmitter will work.
• Items are usually shipped out within 24-48 hours during the business days after payment has been received.
• Please make sure your delivery address is correct before purchase!
• Sellers are not responsible for service transit time. Transit time is provided by the carrier.
• If your item is damaged upon received, please contact us within 48 hours including picture proof of damaged items/shipping label/ packing box.
We will respond within 48 hours with all those information.
• Returns will be voided if the product is mishandled or physical damaged by customer.
• Buyer will be responsible for all kind of return shipping/shipment to the seller for resolving the problem.
• Please contact us before returning.
• We will leave POSITIVE FEEDBACK after receiving the payment. Please contact us if you are not satisfied with the item after receiving it.
• All email will be answered within One working day. If you do not receive our reply, please kindly re-sent your email and we will reply to you as soon as possible.
• We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important to us. We hope that you contact us immediately.Before you give us neutral or negative Feedback, so that we can satisfactorily address your concerns.Good communication can fix all problems, we always believe that as long as you are willing to communicate with us, we will give you a satisfactory answer.