Description
The SMT/SMD components counter adopts the principle of photoelectric sensing, and uses the corresponding relation between the guide hole and the part, through the special-purpose processing chip and the large-scale centralized circuit processing to realize less error, accurately measure the number of SMD parts, can realize the convenient and quick count. It is an efficient auxiliary equipment for SMT material management.
Key Features
Build to Last: High-quality aluminum and steel plus powder coating process make it sturdy and stable, anti-corrosion and rust-proof, keeping excellent function for a long time.
Powerful Function: Its efficient, stable, and 25W powerful motor help you automatically calculate the number of parts and simplify the part-feeding process.
Easy to Clean: The smooth spray powder surface is so smooth that you can remove the stains with just a light wipe with a wet towel.
Accurate Counting: The laser cutting gears are more accurate, and the alignment fiber optic leak detection device can accurately measure the number of parts using the correspondence between the guide holes and the parts. Also, the machine will automatically stop when it is empty, making it safe for you to operate.
Multiple Adjustments: You can choose to set the number of parts manually or use the automatic mode, and also you can choose at will among three speeds: high speed, medium speed, and low speed to improve the efficiency of the counting.
Comfortable Operation: The 3-digit LCD display makes it easy to observe the process and status of dispensing while the high-precision motherboard control and English&Chinese intelligent control panel allow you to set the count, pitch, time, forward and reverse rotation, leak detection, which is very convenient.
Ready to Use: It does not require complicated assembly, while the complete accessories and detailed instructions help you to complete the installation and start using it quickly.
Thoughtful Design: The interface on the back allows you to connect a printer(not included) or a scan gun (not included) for easy assembly line operation and product quantity and quality management.
Quality Service:We are honored that you have chosen our product. We have sufficient confidence in the quality of the product so that you can buy it confidently. But if you have any questions, you can contact our customer service, he will patiently answer and solve your problems.
Details
Rounded Edges: Compared to stiff right angles, the rounded burr-freeedges make it more comfortable to touch while better caring for your skin.
Auxiliary Rod: The rod in front of the control panel helps you to make the machine stable without shaking and assists you to apply better force.
Mirror: It helps the fiber optic detector to receive the signal better, and also facilitates you to observe the status of the point material.
Operation Methods:
Connect the power cord to the host and connect the AC110V power supply.
Turn on the POWER switch of the machine panel, and the LCD panel will shine.
Press PITCH to set the spacing of parts to be counted and press "ENTER". Place the parts to count on the left side tray.
Manually pull out the material belt and clamp it between the material plate and counting gear, and align the intermediate hole of the first part and blank space to the middle line of the material plate.
Press the "STOP/RESET" button for 2 seconds to return the number to zero. Note: when pulling the material belt, the counting gear will rotate and count.
Press the "SETTING" button to switch to manual and automatic mode. If you choose automatic mode, you must input the quantity you want to count. Otherwise, press "FORWARD" and the motor will not rotate.
Pull the material belt by hand and wind it to the empty material plate. Press "FORWARD /RIGHT" to count.
The motor will stop when the quantity arrives. Due to the inertia principle, the number of counts may be more or less than the set value of about 1, which can be manually rotated to the LCD display set value in the direction of the material disk, that is, the number of parts.
After counting, press the "REVERSE /LEFT" tape and then roll it back to the original LEFT panel, and then stop rotating.
Installation
Mirror Installation
Use the hexagonal plate hand to screw out the two hexagonal screws behind the pointing machine.
Align the mirror with the hole of the dispenser and then screw on the screws.
Pallet Installation
Use the screwdriver to screw up the 2 screws on the rotating shaft.
Align the tray with the hole of the shaft and lock the screws.
Application
It is suitable for belt elements made of SMD material and for pulleys of any diameter, and widely used for counting the quantity of SMD materials such as resistors, magnetic beads, capacitors, diodes, ICs, various chips, and LED beads. It can be applied in the electronic product manufacturing industry, SMT processing factory, EMS professional electronic manufacturing service factory, SMD parts manufacturer, SMD parts supplier, parts counter, and tape packaging manufacturer for fully automatic IQC incoming inspection, counting of tape packaging and checking of missing parts, inventory management, and other operations.
Specification
Color: White
Shape: Rectangle
Style: Modern
Display: 3-digit LCD
Power Cord Length: 1.5m/ 4.9 ft
Assembly Required: Yes
Number of Items: 1
Power Supply: AC110V,60HZ
Power: 25W
Counting Range: -99999~99999PCS
Material: Aluminum, Steel
Process: Laser Cutting ( Gear Sheet ), Powder Coating ( Surface ), Computer Gong Production Process ( Machined Parts )
Pitch: 2mm/ 0.04in, 4mm/0.07in, 8mm/ 0.16in,10mm/ 0.31in, 12mm/ 0.47in, 16mm/ 0.63in, 24mm/ 0.94in, 32mm/ 1.26in, 44mm/ 1.73in, 56 mm/ 2.2in
Width: 4mm/0.07in, 6mm/ 0.24in, 8mm/ 0.16in, 12mm/ 0.47in, 16mm/ 0.63in, 24mm/ 0.94in, 32mm/ 1.26in, 44mm/ 1.73in, 56mm/ 2.2in
Product Size: 76.5*30*19cm/ 30.12*11.8*7.48 in
Net Weight: 9.5kg/20.9 lbs
Gross Weight:10 kg/ 22.05 lbs
Package Included
1 * SMT/SMD Components Counter
1* Power Cord
1* Mirror
1* Chinese and English Manual
All Accessories for Assembly
Notes
After unpacking, please check if all the attachments are complete.
Please read the operation manual carefully before using and keep it properly.
Check whether the voltage specification is consistent with that of municipal power. Please make sure to connect the ground wire to ensure the safety of the person and parts.
Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before ordering.
