Cordless Planer HLC 82 EB Basic Set

When power meets planing quality.

The handy HLC 82 cordless planer is your reliable companion on the construction site and in the workshop for quick adjustments. Chamfering beams, smoothing edges on stud walls, rabbeting doors, adjusting baseboards or filler strips: the cordless planer offers flexibility in its applications. And you can always rely on maximum power: the HLC 82 performs best with the powerful 5.0 Ah Li-HighPower or the 8.0 Ah Li-HighPower battery pack.

Strengths and Benefits

Fast: Increased speed and flexibility thanks to a maximum chip removal of 2.5 mm and a rebate depth of 25 mm

18V Power: Ideal in combination with the 5.0 Ah Li-HighPower or the 8.0 Ah Li-HighPower battery pack for maximum runtime and maximum performance

Flawless: Pulling cut and spiral blade for an exceptionally fine surface finish

Versatile: Chamfering with three integrated 90° V-grooves in the sole

For large chip removal: Thanks to the two different dust extraction channels, the planer is also suitable for continuous use with higher chip removal rates

Flexible: Dust extraction port can be attached on either side for comfortable working; the suction hose is out of the way

Convenient: Removable chamfer sole for quickly and accurately creating chamfers on beams and squared timber

Handy: Easy guidance of the planer on the workpiece thanks to its ergonomic design

Quiet: The spiral blade makes working significantly quieter

Precise: Chip depth adjustment (0-2.5 mm) mm) on the rotary knob – simple and convenient, easily accessible, even while planing

Compatible: with all Festool 18V battery packs (except Ergopack)

Powerful: the brushless EC-TEC motor ensures constant performance, even at maximum cutting depth

Efficient: the quick brake brings the planer to a standstill in less than 2 seconds, minimizing the risk of injury and damage to the workpiece

Use only with spiral blades HW 82 SD HLC 82 (577999)

HL 850 planer heads not compatible

Long chip channel

Main applications

Performing quick adjustment work

Ideal for quickly creating precise and long chamfers on beams and squared timbers thanks to the removable chamfer base

Straightening the edge transitions of timber stud walls

Doubling up rafters, adjustment work during renovations of old buildings (roof, dormer, floors, ceiling)

Adjusting existing stair stringers

Adjusting work on doors, Baseboards or filler strips

Versatile application possibilities thanks to the 25 mm rebate depth and the 3 V-grooves integrated into the planer sole

Scope of delivery

Parallel fence PA-HLC 82/EHL 65

Rebate depth stop FA-EHL

Chamfer sole FNS-HLC 82

Allen key SW 2.5

Short dust extraction channel

Systainer SYS3 M 237

ATTENTION US BUYERS: EUROPEAN VOLTAGE & PLUG - ADAPTATION REQUIRED FOR USE IN USA!

This item is a European model with the following specifications:

• Voltage: 220–240V (50Hz) – Not compatible with standard US 110–120V outlets!
• Plug Type: European (Schuko Type F) – Will not fit US outlets without an adapter.

To use this tool in the USA, you will need:

1. A step-up voltage converter (220V–240V output, min. 1000W capacity) to avoid damage.
   *Example: Simran AC-1000 or similar heavy-duty transformer.*
2. A European-to-US plug adapter (or replace the power cord).

⚠️ Important Notes:

• DO NOT plug directly into 110V outlets – this will damage the tool!
• Motors may run slightly faster due to the US 60Hz frequency (vs. EU 50Hz).

Sold as-is – buyer assumes all responsibility for voltage/plug adaptation.