eBay

【Compatiboility】Tank clamp o-ring replacement part number 39010200, O-497. Pool filter o ring replacement compatible with pentair clean & clear plus fiberglass reinforced polypropylene tank filter model CCP420, CCP520, CCP320, CCP240, Quad pool and spa D. E. filters model Quad D.E. 60, Quad D.E. 80, Quad D.E. 100, FNS Plus vertical grid filter tank models FNSP24, FNSP36, FNSP48, FNSP60, sm/smbw-4060.
【Function】Pool filter lid tank o-ring helps space the grids and makes a seal between the grids and the cap. Replacing the tank body o-ring can return your swimming pool or spa filter system back to peak performance.
【High-Quality Materials】Replacement for pentair ccp420 parts is made of sturdy and durable material, perfect seal no leaks. When installing o-rings, apply lubricant for better sealing.
【Installation Steps】39010200 pool filter tank o-ring is easy to install, First turn off the power, release the air pressure in the tank, disassemble the fixture kit and remove the upper cover, then remove the old o-ring, apply lubricant to the surface of the new o-ring and install, and finally close the lid, turn on the power, and check for leaks.
【After Sales Service】If you have any questions about the quality, material and function of 39010200 tank clamp o-rings, you can always send us an email and we will reply within 24 hours.

Shuisen 39010200 Pool Filter O-Ring, Tank Clamp O-Ring Compatible with Pentair Pool and Spa D. E. Filter
Compatibility
39010200 pool filter o-ring compatible with pentair clean and clear plus filter tank models CCP240, CCP320, CCP420, CCP520;
Tank clamp o-ring compatible with Pentair FNS Plus Filter Tank models FNSP24, FNSP36, FNSP48, FNSP60;
Filter tank o-ring compatible with Pentair Quad D.E. models Quad D.E. 60, Quad D.E. 80, Quad D.E. 100.
How to replace 39010200 tank clamp o-ring:
1. Turn off the power and release the air pressure in the tank.
2. Disassemble the clamp kit and take off the upper part cover.
3. Take out the damaged O-ring, apply lubricant to the surface of the new O-ring,and then install the O-ring.
4. Close the cover and install the clamp kit.
5. Turn on the power, run the work,and check for leaks.