JL-118D 277-Volt Stem Mount Thermal Photocontrol, Dusk to Dawn Light Sensor for Channel and Porch Lighting Use, Grey
Product Description
The JL-118 series wired thermal light controller products are suitable for automatically controlling channel lighting and porch lighting according to environmental lighting levels. It is very suitable for some indoor and outdoor scenes, such as parks, company buildings, shopping malls, etc.
Stem Mount Thermal Photocontrol; Model: JL-118D; Material: UV-Resistant PC Shell; Lamp Rated Power: 1800W; Input Voltage: 277V; Ballast Rated Power: 1100VA; Color: Grey; Accessories: Mounting Nut; Package Includes: 1Pcs x Thermal Photocontrol
The JL-118 series thermal photocontrol is based on an electric heating structure and can provide a delay control function of over 30 seconds to avoid redundant switching of spotlights or any other light sources that appear suddenly at night. Regardless of the operating temperature, the temperature control system can provide consistent performance. Not only that, all models of thermal light controllers are equipped with a shading film, which facilitates the calibration of the on/off values of the
Firstly, disconnect the power supply, then remove the junction box cover. After fitting the threaded tube of the light control switch with a waterproof rubber ring, a through hole is drilled from the inside out, and a copper alloy locking nut is used to tighten it from the outside.
1. Please pay attention to the input voltage and power; 2. When installing the lamp, do not let the photosensitive eye face the direction of the artificial light source or its reflected light, otherwise it may cause the lamp to cycle on and off at night.
Stem Mount Thermal Photocontrol; Model: JL-118D; Material: UV-Resistant PC Shell; Lamp Rated Power: 1800W; Input Voltage: 277V; Ballast Rated Power: 1100VA; Color: Grey; Accessories: Mounting Nut; Package Includes: 1Pcs x Thermal Photocontrol
The JL-118 series thermal photocontrol is based on an electric heating structure and can provide a delay control function of over 30 seconds to avoid redundant switching of spotlights or any other light sources that appear suddenly at night. Regardless of the operating temperature, the temperature control system can provide consistent performance. Not only that, all models of thermal light controllers are equipped with a shading film, which facilitates the calibration of the on/off values of the
Firstly, disconnect the power supply, then remove the junction box cover. After fitting the threaded tube of the light control switch with a waterproof rubber ring, a through hole is drilled from the inside out, and a copper alloy locking nut is used to tighten it from the outside.
1. Please pay attention to the input voltage and power; 2. When installing the lamp, do not let the photosensitive eye face the direction of the artificial light source or its reflected light, otherwise it may cause the lamp to cycle on and off at night.