Full Functionality for Tire Pressure Monitoring System

LAUNCH Creader TPMS 5011 V2 can fully diagnose TPMS problems, activate TPMS sensors , TPMS relearning and sensor OE number lookup. Help you complete the replacement of the tire pressure sensor, the replacement of the tire, the on-line assembly and testing of the vehicle factory, and the independent detection of whether the sensor itself is correct.

LAUNCH Creader TPMS 5011 V2 provides users with an experience of unparalleled efficiency and accuracy. Check sensor data, sensor ID, tire pressure or temperature, battery condition, sensor location and diagnostic TPMS to read or write sensor ID, read or clear TPMS code, turn off TPMS warning light, retrieve TPMS E/CU information, and more. This TPMS tool allows users to progarm sensor data to LAUNCH sensors to replace tire pressure sensors that are not working properly and have low battery life.

[Activate Sensors]

LAUNCH Creader TPMS 5011 V2 can activate all 315/433MHz tire pressure sensors. Allows users to activate TPMS sensor to view sensor data, such as sensor ID, tire pressure, tire frequency, tire temperature and battery condition.

[Relearn Sensors]

Allows you to check and view the detailed TPMS sensor relearn procedures. Relearn operation applies only when the newly progarmmed sensor IDs are different from the original sensor IDs stored in the vehicle’s E/CU. Relearn is used to write the newly progarmmed sensor IDs into the vehicle’s E/CU for sensor recognition. You can check the OE number of the original sensor. OBD Relearn: Write TPMS sensor ID to TPMS module through OBD connector.

[TPMS Diagnostics]

Read and erase TPMS error codes. Displays TPMS live data in the form of graphs. Get access to the TPMS E/CU information. Turn off the TPMS malfunction light.

[TPMS Progarmming for LAUNCH Sensor]

>>Auto Create: Create a new ID matching your vehicle. Progarm the ID into a new LAUNCH Sensor.

>>Manual Create: The Manual Create function lets users to input the sensor ID manually. Support input of random ID or original sensor ID (if any).

>>Copy ID by Activation: Write in the retrieved original sensor data to the LAUNCH-sensor. It is used after the original sensor is triggered.

[Unlimited Repeat Progarmming]

LAUNCH Creader TPMS 5011 V2 can progarm sensor data to LAUNCH sensor and replace the sensor with low battery life or not working properly. It can progarm 8 LAUNCH SENSOR simultaneously. Highly recommended: LAUNCH LTR-03 Sensor.

12 Essential Maintenance Services - Meet Your Daily Needs

LAUNCH Creader TPMS 5011 V2 is equipped with 12 maintenance functions, which are also the most commonly used ones. In addition, we provide a no-hassle service menu and fix cases empowers users to quickly start diagnostics and repair.

[Brake Reset] - In situations where the brake pads and brake pad sensors are replaced, the brake pad indicator light is on, or the brake pad sensor circuit is short circuited, Use this tool to reset the brake pad.

[Oil Lamp Reset] - Reset the oil life systems every time the oil and oil filter are changed.

[Battery Reset] - After replacing the battery or battery monitoring sensor, reset the monitoring unit of the car battery.

[SAS Calibration] - After replacing the steering angle position sensor and mechanical components of the steering system, calibrate the steering angle and clear fault records.

[ABS Bleeding] - Bleed the brake system to restore ABS braking sensitivity.

[Throttle Reset] - Initialize the throttle actuator and return to the default state.

[D-P-F Regeneration] - Clearing particulate matter from the D-P-F filter through continuous combustion oxidation mode to stabilize filter performance or replace D-P-F components.

[TPMS Service] - Quickly search for tire sensor ID from the vehicle E/CU and perform TPMS replacement and sensor testing.

[Injector Coding] - After installing or replacing a new fuel injector, code the new fuel injector number to replace the previous one.

[Sunroof Reset] - Reset the sunroof, closing on rainy days, slide or tilt sunroof memory function, outside temperature threshold, etc.

[Seat Calibration] - Calibrate the memory in replaced or repaired seats.

[Windows Calibration] - Perform door window matching to recover E/CU initial memory.

Product Comparison Between Creader TPMS 5011 V2 and CRT5011E/CRT5011X