Store Categories
Product Overview
Details
Two ways for choose: Manual or Machine. Machine polishing will generally yield better results.
Features and Advantages:
Packing List:
Prepare: Clean the headlight lens with water. Mask off the surrounding perimeter of the lens to avoid scratching the paint of the vehicle.
Step1. Sand
Wet the sanding disc and attach it to the backer pad. Sand with three different grits to completely remove the heavy yellowing, fading, and corrosion.
Note: Use the sanding discs from coarse to fine: P800--> P1200--P2000. Not doing so will result in restoration failure
Step2. Polish
Attach. the orange sponge disc to the backer pad and apply the polish paste. Polish the lens until the shine is restored to its original condition.
Note: For best results, use an electric buffer or polisher. If polishing by hand, polish with no less than 200 strokes in a circular, clockwise motion.
Step3.UV Protection Liquid (Important)
Clean the headlight lens and make sure the lens is dry before the protection step. Use the white sponge disc provided in the kit. Evenly apply the protect liquid on the surface of the lens. After apply it, stay for 10-15mins to let the liquid flow evenly itself. Then dry it direct sunlight immediately (1 to 2 hours is suggested). if not, dust and other dirt will adhere to protect liquid due to its viscosity, which will affect the brightness of the headlight.
Note: Please must avoid any sunlight when apply the protect liquid on headlight (very important). After step 3, keep the lens dry. Do not wash the car for 24 hours
Step4. About removing the Masking Tape
After finishing all the steps, please remove the mask tape, otherwise the longer the time, the harder it is to remove and may leave traces
This is the description of Payment Method.
Do not dismiss your dream.
To be without dream is to be without hope.
To be without hope is to be without purpose.
Do not run through your life so fast that you forget not only where you have been, but also where you are
going.
Life is not race, but a journey to be savored each step of the way.
This is the description of Returns Policy.
Do not dismiss your dream.
To be without dream is to be without hope.
To be without hope is to be without purpose.
Do not run through your life so fast that you forget not only where you have been, but also where you are
going.
Life is not race, but a journey to be savored each step of the way.
Copyright©2018 DataCaciques
Product Overview
Details
Two ways for choose: Manual or Machine. Machine polishing will generally yield better results.
Features and Advantages:
Packing List:
Prepare: Clean the headlight lens with water. Mask off the surrounding perimeter of the lens to avoid scratching the paint of the vehicle.
Step1. Sand
Wet the sanding disc and attach it to the backer pad. Sand with three different grits to completely remove the heavy yellowing, fading, and corrosion.
Note: Use the sanding discs from coarse to fine: P800--> P1200--P2000. Not doing so will result in restoration failure
Step2. Polish
Attach. the orange sponge disc to the backer pad and apply the polish paste. Polish the lens until the shine is restored to its original condition.
Note: For best results, use an electric buffer or polisher. If polishing by hand, polish with no less than 200 strokes in a circular, clockwise motion.
Step3.UV Protection Liquid (Important)
Clean the headlight lens and make sure the lens is dry before the protection step. Use the white sponge disc provided in the kit. Evenly apply the protect liquid on the surface of the lens. After apply it, stay for 10-15mins to let the liquid flow evenly itself. Then dry it direct sunlight immediately (1 to 2 hours is suggested). if not, dust and other dirt will adhere to protect liquid due to its viscosity, which will affect the brightness of the headlight.
Note: Please must avoid any sunlight when apply the protect liquid on headlight (very important). After step 3, keep the lens dry. Do not wash the car for 24 hours
Step4. About removing the Masking Tape
After finishing all the steps, please remove the mask tape, otherwise the longer the time, the harder it is to remove and may leave traces
United States:UPS Ground (2-5 Business Day)
Note: We may use faster logistics USPS to deliver to you
1.we only accept payment view paypal. It is fast, Easy and Safe.
2.Payment must be received within 7 business days of auction closing.
If you are satisfied with our service and item, please leave some positive feedback for us. It will give us more energy and passion to do the work better.
If you are not happy, please contact us and tell us the reason, we'll find out the problem and give you a satisfied solution.
Store Categories
