E-Bike LCD Display & Brushless Controller Kit – 500W/750W/1000W for Electric Bike & Scooter

Upgrade or replace your e-bike system with this LCD Display + Brushless Controller Kit. Designed for electric bikes and scooters, this set provides clear riding data, smooth power control, and reliable performance with easy handlebar installation.

---

🔧 Key Features

• 📟 Clear LCD Display
  Backlit LCD screen shows riding data clearly, even in low light. Quick button operation makes it simple to control settings.

• ⚙️ Silent Brushless Controller
  Works quietly with fast, sensitive response to motor status for smooth riding performance.

• 🛠 Easy Installation
  Comes with LCD bracket suitable for 22.5mm handlebars.

• 🌧 Rainproof & Durable
  Made from high-quality materials for long-lasting outdoor use.

• 🔐 Advanced Settings

  • Power-on password option

  • Light control function

  • Assist control (PAS)

  • Selectable 3 / 5 / 9 speed gears

  • Optional throttle gear division

• 🚲 Wide Compatibility
  Suitable for 500W / 750W / 1000W electric bikes and scooters.

---

📊 Specifications

• Material: Plastic + LCD + Metal

• Waterproof: Rainproof

• Handlebar Fit: 22.5mm

• Display Size: Approx. 15 × 8.5 × 4 cm

• Weight: Approx. 500g

• Power Support: 500W / 750W / 1000W

---

🎨 Cable Color Guide

---

⚠️ Important Factory Settings

• Default factory power setting = 8 (fits most split superchargers).

• If using an integrated supercharger, set value to 12.

• Setting location: P13 in the manual. Adjust to 8 or 12 if incompatible.

• Controller model is sent randomly.

---

🔌 Motor Phase Identification (VERY IMPORTANT)

1. Connect the two green identification wires.

2. Lift the wheel off the ground.

3. Motor will spin automatically.

4. If rotation is correct → wait 10–15 seconds, then disconnect wires.

5. If rotation is reverse → disconnect and reconnect wires to reverse direction.

6. After correct rotation, leave identification wires disconnected.

---

❗ Error Code Troubleshooting

E06 – Undervoltage (Default 36V)

• Meter defaults to 36V.

• Manually adjust meter to 24V or check battery and wait 10 seconds without touching anything.

• It will auto-convert.

E07 – PAS & Throttle Wiring Incorrect

• PAS cable (Red/Yellow/Black) and Throttle cable (Red/Green/Black) connected wrongly.

• Recheck wiring and signal line.

E10 – Loose Display Connector

• Unplug and reconnect the display cable firmly.

---

📦 Package Includes

• 1 × LCD Display

• 1 × Brushless Controller