Description

The HD 3000 RGB Edition Black 2 Ohm digital amplifier module transforms your car sound system into a truly immersive experience. With its built-in RGB LED lighting, you can choose from 108 light effects that perfectly complement your music, syncing to the beat for the perfect atmosphere.

This 3000W RMS amplifier is available in 1, 2 or 4 ohm versions and offers an exceptional frequency response of 10Hz to 20kHz, ensuring its compatibility with various speaker models such as subwoofers, woofers, midbass, midrange, drivers and tweeters. Plus, with built-in Gain, Low Pass, High Pass, and Bass Boost adjustments, you have complete control over your listening experience. Another new feature is compatibility with the Monitor Level Remote accessory, in addition to the characteristic M1 LED monitor.

Due to its diversity, it can be installed to amplify speakers in trios in Goiás, trucks, pickup trucks, SUVs, motorcycle advertising boxes, trio boxes, bob boxes, residential boxes, horn boxes and cannon boxes, sound walls, sound walls, among others.

Choose the HD3000 RGB Edition for unmatched power, quality and style in your sound system.

Technical specifications:

• Operation class: class d.

It is the indication of the construction of an amplifier, class d (also called digital) due to the pwm (pulse width modulation) used in its operation, it allows for a small, efficient amplifier with reduced heating compared to other construction classes.

• Number of channels: 01.

Number of channels to use in your project, with this specific model you have the option of connecting only 1 channel.

• Power @12.6v – 2 ohms: 3000w rms.

The power with a voltage of 12.6 volts is related to the operation of the vehicle/power source.

• Power @12.6v – 4 ohms: 2025w rms.

The power with a voltage of 12.6 volts is related to the operation of the vehicle/power source.

• Minimum output impedance: 2 ohms.

Association with the speaker result, where, for example, we can connect two 4 ohm speakers or four 8 ohm speakers to the channel for this result.

• Minimum output impedance: 4 ohms.

Association with the speaker result, where, for example, we can connect two 8 ohm speakers or just one 4 ohm speaker to the channel for this result.

• Minimum input sensitivity: 0.22V ~ 4V

Lower voltage required for maximum results with the amplifier, that is, with low volume on the radio, we will achieve good results.

• Frequency response: 10hz ~ 20kHz(-3db).

With the frequency response it is possible to identify the application of the amplifier, so if the speaker or any other type of transducer you are using is understood within this response, it means that we can use that product in your project.

• Low pass variable (lpf) of the crossover: 80hz ~ full.

Lpf or low-pass filter (term in English) means low pass filter, that is, it allows everything that is below this reference to be reproduced and what is above this indication will not be used, a common use of this function is to reduce the presence of voice in subwoofers.

• Variable high pass crossover (hpf): 10hz ~ 80hz.

HPF or high-pass filter (term in English), means high-pass filter, that is, it allows everything above this reference to be reproduced. The common use of this function is to reduce the presence of bass in door speakers, for example.

• Bass boost: 0 ~ 10db (50hz).

Bass boost is the bass reinforcement for the amplifier's sub channel, that is, an "extra" reinforcement for the bass.

• Supply voltage: 9 to 16v.

It is an indication of the amplifier's operation where it will have a minimum and maximum voltage for its operation, outside of this conception it does not turn on or activate protection.

• Safe consumption: 1.60a.

This is a reference to the consumption of the amplifier turned on and without music.

• Maximum musical consumption: @12.6vdc: 152a.

This is the estimated consumption of the amplifier working at the minimum impedance playing music at maximum volume.

• Maximum consumption in sinusoidal signal: @12.6vdc: 304a.

Reference for bench/laboratory tests under specific conditions of resistive load, fixed frequency and stable power supply.

• Protection system: output short/high/low supply voltage/thermal protection.

This system exists to protect the operation of the amplifier. It can be related to the output, when we have connections below the minimum impedance, a short circuit in the installation or even speakers with problems. This protection may also occur due to voltage outside the operating range, or even thermal protection that occurs due to conditions in which the amplifier heats up above normal.

• Dimensions: width 22.9cm x height 6.5cm x depth 18.6cm.

Extreme product dimensions.

• Weight: 2.4kg.

Gross weight of the amplifier.

Package contents:

• 1 digital amplifier module HD 3000 RGB Edition 2 ohms;

• 1 M1 Clip LED Monitor;

• QR code to download the manual;

• 1 Taramps Sticker.

Important:

We recommend that installation be carried out by a specialized professional and we are not responsible for misuse of the product.