Solid Motorized Ball Valve 1in Full Port SS 9-24V AC/DC NC Auto Return

Motorized ball valves provide an energy-efficient option compared to solenoid valves, particularly for extended periods of operation. They primarily use power when opening and closing, with minimal consumption once fully open. This enables continuous operation without the concern of overheating or premature failure. We recommend using Teflon tape to ensure the sealing of NPT threads.

• IP65 Rating: protection from water jets from any direction. If permanently installed outdoors, it is advisable to place it in a shaded area or in a protective enclosure to prevent prolonged exposure to rainwater.
• Full port. The internal diameter of the valve matches that of the connected pipe.
• Normally closed. It remains closed without power and opens when energized.
• 2 Wire auto return wiring. DC: Connect the red wire to the positive pole(+) and the black wire to the negative pole(-) to open the valve. Disconnecting either wire will close the valve. AC: Connect one wire to the positive pole(+) and the other to the negative pole(-) to open the valve. Disconnecting either wire will close the valve. To ensure proper operation of the auto-reset function in case of power failure, it is necessary to power the equipment for approximately one minute for charging the capacitor in 2-wire-auto-return motorized ball valves.

Parameters
Brand: U.S. SOLID
Model: USS-MSV00009
Valve Material: Stainless Steel
Is Drinking Water Available?: Yes
Seal: PTFE
Voltage: AC/DC 9-24V
Port Size: 1" NPT Full Port
Flow Aperture: 25mm (0.98in)
Normally Closed/Normally Open: NC, Normally Closed
Maximum Torque: 6 N·m
Maximum Power: 5 W
Open/Close Time: 6-8 Seconds
Life Expectancy: 80,000 to 100,000 Cycles
IP Rating (Casing): IP65
Maximum Pressure: 1.0 MPa (145 psi)
Medium Temperature: 0℃ to 100℃ (32℉ to 212℉)
Ambient Temperature: -5℃ to 40℃ (23℉ to 104℉)
Wiring: 2 Wire Auto Return
Casing Color: Blue