M14.1x1.5 15mm Oversize Piggyback Oil Drain Plug Self Tapping Pan Thread Repair Kit
    • Condition: 100% new
    • Color: Silver & Gold
    • Material: Stainless Steel & Copper & Rubber
    • Thread Size: M14.1x1.5
    • Item included:

      1 x Piggyback Oil Drain Plug

      1 x Hexagon Wrench

      2 x Sealing O-rings

      2 x Copper Gaskets

    • Compatible With: fit for Universal

    • This Is Aftermarket Replacement Item But Not Genuine

    • Note:

      1) All dimensions are measured by hand, there may be small deviations.

      2) Color may vary slightly due to the color setting of each individual monitor.

Feature:

1) 100% new with good quality.

2) The oil drain plug is made of sturdy 304 stainless steel.

3) The gasket is made of high-quality pure copper.

4) The high-quality rubber sealing the O-ring can keep the oil from leaking after the installation is completed.

5) It can help you to prevent the whole pot from being replaced due to slippage.

How to Install:

1) Clean the oil pan before installation to ensure that the area and threads are free of excess oil and impurities.

2) Thread the piggyback plug into the hole, forward a few turns, then back a few turns.

3) After the plug bottoms out, remove it, then clean up the iron chips around the punch hole.

4) Using a T-socket wrench, torque the plug to approximately 14ft-lbf.

5) After installing the piggyback plug, screw in the small piggyback oil drain plug, and the installation is complete. (Note: When removing the small oil drain plug, please ensure that the large piggyback plug is in a fixed state)

Datacaciques