1/2" BSP Long Running Nipple Brass Pipe Fitting 30-120mm Plumbing Tank Connector
Product Description:
- ※ Material: brass
- ※ Color: yellow (silver is the color after plating)
- ※ Size: see drop down list
- ※ Properties: Brass has the advantage that it is not easy to rust, corrosion-resistant, easily conducts heat and has strong electrical conductivity, high temperature resistance, high pressure resistance, explosion protection, etc.
| Inch, DN, nominal comparison table | ||
| Inch | DN | Nominal outside diameter (mm) |
| 1/8" | DN6 | φ9.5 |
| 1/4" | DN8 | φ13.5 |
| 3/8" | DN10 | φ16.5 |
| 1/2" | DN15 | φ20 |
| 3/4" | DN20 | φ25 |
| 1" | DN25 | φ32 |
| 1 1/4" | DN32 | φ40 |
| 1 1/2" | DN40 | φ50 |
| 2" | DN50 | φ63 |
| 2.5" | DN65 | φ75 |
| 3" | DN80 | φ90 |
| 4" | DN100 | φ110 |
※ Product launch related to pipe fittings:1. Nipple: Used to connect two fittings and is most commonly used in plumbing solutions.
2. Reducer: If you want to connect two pipes with different widths, use a reducer in this case.
3. Angle: This changes the direction of the pipe by 45 ° or 90 °.
4. Cross: As the name suggests, this component has a cross shape with four branches in opposite directions. One of the four crosses serves as an entrance, while the remaining three branches serve as an exit.
5. Connection: The pipeline must be disconnected during maintenance, fastening or replacement. A joint is a component that is used to disconnect the pipe when it is necessary for the above purpose.
On Jan 9, 2026 at 23:27:09 PST, seller added the following information: